Overview
The Skyjacker 3 Inch Lift Kit with Shocks, part number C933PAK-R, is a direct-fit add kit that gives a 3 inch lift. Its lift height range is 0 to 3.5 inches, and it comes with shocks.
The kit comes with a component box holding the parts for this add kit. Check the box contents against your installation before starting the work.
Key features
- 3 inch lift kit, sold as an add kit
- Lift height range of 0 to 3.5 inches
- Shocks included.
- Direct-fit design
Before you install
An add kit is fitted to the vehicle you already own, so the job is easier when the existing suspension is sound first. Look over ball joints, tie rod ends, control arm bushings and shock mounts before adding new parts. A lift raises the load on every joint, so worn components that were tolerable at stock height can wear faster afterward.
Plan for the work that follows the install. Alignment is normally needed after a height change, and brake lines and driveline angles should be checked once the new height is set. Tire wear is worth watching over the first few drives, since changed geometry can show up as uneven tread.
- Inspect joints and bushings before fitting
- Re-torque fasteners after the first few drives
- Set alignment once the final height is reached
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | C933PAK-R |
| Type | Add kit |
| Lift | 3 inch |
| Lift height range | 0 to 3.5 inches |
Vehicle fitment
It fits the 2000 and 2002 Cadillac Escalade in the Base trim, and the 2000 GMC Yukon in the Denali trim. Other Escalade and Yukon years, plus the Escalade ESV, EXT, Suburban and Yukon XL, are not covered.
Other Escalade and Yukon years, and the Escalade ESV, EXT, Suburban and Yukon XL, are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This add kit is fitted to the existing vehicle using the component box. Check the box contents against your installation before starting.









