Overview
The Rubicon Express JKR443FPR is a 3.5 inch extreme duty lift kit for the Jeep Wrangler JK. It uses a radius front and rear 4-link long arm system designed for the most popular JK suspension systems.
The control arms are chromoly and adjustable, with Super-Flex spherical ball joints and Super-Ride bushings. A full width transmission crossmember is part of the kit, and it installs without welding.
Front and rear Fox Performance Resi shocks are included. The FOX Performance Series shocks are covered by the FOX warranty and are not eligible for the Rubicon Express Advantage Warranty.
Key features
- Radius front and rear 4-link long arm system
- Chromoly upper and lower control arms
- Adjustable control arms
- Super-Flex spherical ball joints
- Super-Ride bushings
- Front and rear Fox Performance Resi shocks
- Full width transmission crossmember
- No welding required
Long arm geometry and driveline
Long arms change how the axle moves, controlling wheel travel through a link geometry that differs from a stock leaf or coil setup. On a radius 4-link, the arms carry braking and acceleration forces, so the mounts and bushings take more load than they would on stock parts. Inspect the bushings and mounts for cracking or play after rough trail use, since they are the first place wear shows up.
Because the axle location changes, driveline angles need attention. Check the pinion angle and the drive shaft after the install, and confirm the exhaust clears the new arm positions. Steering components and shock mounts are often checked alongside long arms, and they should be verified for fit before the first drive.
- Torque all arm fasteners after the first drive
- Check driveline angles at the axle and transfer case
- Confirm exhaust clearance at full axle travel
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JKR443FPR |
| Lift height | 3.5 inch |
| Lift height range | 2.5 to 3.5 inches |
| Suspension type | Extreme duty radius front and rear 4-link long arm |
| Control arm material | Chromoly |
| Ball joints | Super-Flex spherical |
| Bushings | Super-Ride |
| Shocks | Fox Performance Resi, front and rear |
| Crossmember | Full width transmission |
| Welding | None required |
| Warranty | FOX warranty on the shocks |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK). Make sure year, model and trim match your vehicle before you order.
The JL, the Gladiator, and the older TJ and LJ are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
For 2012 and later trucks, an exhaust modification or a front drive shaft may be required. Long arm kits change the axle location and driveline angles, so have both checked after installation.
What’s included
Chromoly upper and lower control arms, the radius arms or radius arm brackets, the full width transmission crossmember, Super-Flex spherical ball joints, Super-Ride bushings and front and rear Fox Performance Resi shocks.







