Overview
The Pro Comp K5085BPX is a 7-inch lift kit with front MX2.75 coilovers and Pro Runner rear shocks. The front uses front and rear crossmembers, compression struts and steering knuckles, and the rear uses a block and U-bolt lift.
Front sway bar spacers, bump stop extensions and brake line extension brackets are included in the front package. Stage 1 and Stage II both appear for this kit, so confirm the stage before ordering.
Key features
- 7-inch lift height
- Front MX2.75 coilovers
- Front and rear crossmembers
- Compression struts and steering knuckles
- Front sway bar spacers and bump stop extensions
- Brake line extension brackets and Pro Runner rear shocks
Coilovers and crossmember setup
Front coilovers and new crossmembers together change where the front suspension sits, so the lower control points and steering knuckles need checking for clearance. MX2.75 coilovers combine spring and damper in one unit, which makes them easy to inspect, but a damaged body usually means the whole unit needs replacing.
The block and U-bolt rear lift works with Pro Runner rear shocks, so the rear end should be checked as a set. Compression struts and bump stop extensions help control travel, and they should be inspected for cracks after rough off-road use. Keep the sway bar spacers tight and look for play at the mounts.
- Verify steering knuckle clearance at full lock
- Inspect bump stop extensions for cracks
- Check coilover bodies for leaks after trail use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5085BPX |
| UPC | 700008130911 |
| Lift height | 7 inch (lift height range 7 inches and up) |
| Lift kit stage | Stage 1 in the spec table (Stage II in the product name) |
| Front control | Front and rear crossmembers, compression struts and steering knuckles |
| Rear lift | Block and U-bolt kit |
| Front shocks | MX2.75 coilovers |
| Rear shocks | Pro Runner |
Vehicle fitment
Verify year, model and trim against your truck before ordering, since 7-inch geometry changes can affect the front and rear setup.
Do not assume coverage from the coilover or Pro Runner names alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 7-inch lift with coilovers and a new crossmember and knuckle geometry needs a full alignment, and the driveline angles and brake lines should be checked after installation.
What’s included
The kit includes the front and rear crossmembers, compression struts, steering knuckles, MX2.75 front coilovers, front sway bar spacers, bump stop extensions, brake line extension brackets, the block and U-bolt rear lift, and Pro Runner rear shocks.









