Overview
The Skyjacker 3.5 to 4 Inch Dual Rate Long Travel Lift Kit with M95 Monotube Shocks, part number JL35RBPMLTD, is a long travel lift kit for the Jeep Wrangler JL. It fits the 2018–2026 Wrangler JL in the Rubicon 2-door trim, with M95 Monotube shocks at the front and rear.
The kit uses dual rate coil springs. The first rate gives a comfortable highway ride and long travel, since the coils extend during articulation to keep the tires in contact with the ground for longer. The second rate uses lower coils and only engages once the suspension compresses past the first rate, which gives steadier control during heavy off-road movement.
The two coil rates are the key to this kit. The first rate sets the highway ride, and the second rate supports the vehicle during harder off-road compression. Keep the coils and shocks matched as supplied, since the kit is designed as one complete system.
Key features
- Dual rate coil design with two spring rates
- Long travel for articulation
- M95 Monotube shocks at the front and rear
- Coil spring rear lift
- Shocks included
Dual rate tuning notes
A dual rate coil setup changes how the suspension responds across its travel. The softer first rate handles everyday bumps and highway speeds, while the stiffer second rate takes over as the suspension compresses further. This split makes the vehicle feel calmer on road and steadier on rough trails, though the feel depends on how the springs are matched to the shocks.
Because the coils and shocks are designed to work together, replacing one part alone can change ride quality and control. Bump stops, control arm angles and driveshaft angles should be checked after fitting. Tires and wheels that are much heavier than stock can also shift how the springs settle over time, so inspect the setup after the first few drives.
- Keep coils and shocks as a matched set
- Check bump stop clearance after fitting
- Inspect driveline angles after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JL35RBPMLTD |
| Suspension type | Long travel lift kit |
| Lift (title) | 3.5 to 4 inches |
| Lift height range 4 to 5.5 inches | 4 to 5.5 inches |
| Front shocks | M95 Monotube |
| Rear shocks | M95 Monotube |
| Rear lift | Coil spring |
| Shocks included | Yes |
Vehicle fitment
It fits the 2018–2026 Jeep Wrangler JL in the Rubicon 2-door trim.
Wrangler JL Unlimited, other JL trims, and Wrangler JK and earlier models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear lift uses coil springs, and the kit includes M95 Monotube shocks, so check the shock length and the spring rates against the lift height before fitting.







