Overview
The Skyjacker T4330STBB is a 3 inch performance strut lift kit with shocks for the 2003-2019 Toyota 4Runner. It has a lift height range of 0 to 3.5 inches and is a direct-fit kit.
Skyjacker has offered leveling kits, sport lifts and suspension kits for over 40 years. The part number is SKYT4330STBB.
It fits the 2003-2019 Toyota 4Runner in the Limited, SR5, SR5 Premium, Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro and Trail trims.
Key features
- 3 inch performance strut lift kit with shocks.
- Lift height range of 0 to 3.5 inches
- Direct-fit application
- Fits the 2003-2019 Toyota 4Runner
- Made by Skyjacker, which describes itself as an innovator in the suspension market for over 40 years
Before you lift
A strut lift raises the vehicle by changing how the front suspension sits, so ride height, camber and caster all move. Stock brake lines, sway bar links, axle angles and steering components were positioned for the factory height, and each one should be checked for clearance and stretch once the lift is in. Taking time at this stage avoids rubbing and binding later.
Plan the work around the rest of the suspension. Shocks, springs and bump stops are often replaced together, and worn ball joints or control arm bushings are easier to replace while the front end is apart. After the first drives, recheck fasteners, listen for new noises, and have the alignment reviewed. Steering that wanders or tires that wear unevenly point to a setup or alignment problem.
- Check brake lines and wiring for stretch
- Inspect bushings and ball joints while the front is apart
- Re-check torque after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYT4330STBB |
| Product type | Strut lift kit with shocks |
| Nominal lift | 3 inch |
| Lift height range | 0-3.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Skyjacker T4330STBB covers the 2003-2019 Toyota 4Runner (Limited, SR5, SR5 Premium, Sport, TRD Off-Road, TRD Off-Road Premium, TRD Pro, Trail).
Only the 2003-2019 Toyota 4Runner is listed. Other Toyota models and 4Runner years outside that range are not included in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and axle components are safety-critical, so professional installation is recommended. Strut-based lifts change front suspension geometry, so have the alignment checked afterward. Torque every fastener to the values given with the kit instructions.
- Support the vehicle on rated jack stands on level ground; never work under a vehicle held only by a jack.
- Inspect nearby bushings, mounts and hardware while the area is open, and replace anything worn.
- Re-check fastener torque after the first miles of driving, and again at regular service intervals.
- Have the alignment checked after any suspension or steering work.
- Confirm tire, brake line and wiring clearance through the full range of suspension travel before driving normally.
What’s included
The kit is a strut lift kit with shocks.
Not included: Compare the kit contents with your installation plan before starting.









