Overview
The Rubicon Express 5.5 Inch Extreme-Duty Long Arm Lift Kit with Rear Track Bar with Mono Tube Shocks (part number RE7205M) is a long arm lift for the 1997–2002 Jeep Wrangler TJ. The stated lift height range is 5 to 6.99 inches, and the kit includes mono tube shocks.
The Extreme-Duty long arms are designed to reduce torque roll and add trail traction. The longer control arms improve the geometry of a lifted vehicle, and the system is a complete suspension replacement rather than an add-on.
Mono tube shocks are supplied with this kit and sized for the 5 to 6.99 inch range. Mono tube shocks use one tube with a separate piston, which many drivers choose for consistent damping. The front and rear stainless brake lines are included, and the belly pan gives access to the transfer case and transmission when service is needed.
Key features
- Mono tube shocks included
- Chromoly long control arms
- PT-Meg Super-Ride bushings designed for on- and off-road use
- Adjustable control arms with Super-Flex spherical ball joints
- Tuned lift springs
- Front and rear stainless brake lines
- Rear track bar
Mono tube shock basics
A mono tube shock uses one tube with a separate floating piston, and the gas and oil are kept apart inside the same cylinder. The design is often chosen for steady damping because the working parts are less likely to aerate, and it can tolerate heavy use on rough trails.
Mono tube shocks still need the same checks as any shock. Look at the seals, bushings and mounts, and confirm the shock is not rubbing the new arms or the body at full travel. Because the shock sets how quickly the suspension returns, a worn unit can make the lift feel bouncy.
- Check for oil on the shock body
- Inspect eye bushings and mounting hardware
- Confirm shock clearance at full compression
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7205M |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Extreme-Duty long arm |
| Shock absorbers | Mono tube, included |
| Brake lines | Front and rear stainless |
| Fitment type | Direct fit |
Vehicle fitment
This kit fits the 1997–2002 Jeep Wrangler (TJ) in the SE, Sahara, Sport and X models.
The 2003–2006 TJ and the LJ Unlimited are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The mono tube shocks come with the kit, so the shock mounts only need to be checked against the new arms. Set the alignment and check the driveline angles once the lift is complete.
What’s included
Mono tube shocks, tuned lift springs, chromoly long arms, PT-Meg bushings, Super-Flex spherical ball joints, a rear track bar, stainless brake lines and a three-piece belly pan.


