Overview
The Rough Country 4-inch X-Series suspension lift kit for the Jeep Wrangler, part number R/C66130, fits the 1997–2006 Wrangler (TJ) and the 2004–2006 Wrangler (LJ) Unlimited and Unlimited Rubicon versions. It is an all-inclusive lift that levels the front with the rear and adds ground clearance for tires up to 33 inches.
The kit includes X-Flex adjustable control arms with Clevite rubber bushings, sway-bar quick disconnects and N3 shocks at the front and rear. Designed for flexing, crawling and trail use, it also includes an upgraded forged adjustable track bar.
The forged track bar is made of forged steel and weighs 16 lb. Its full on-vehicle adjustability helps keep the axle centered under hard articulation.
Key features
- X-Flex adjustable control arms
- Clevite rubber bushings
- Sway-bar quick disconnects
- N3 shocks at the front and rear
- Forged adjustable track bar, listed at 16 lb
- Listed lift height range of 4 to 5.5 inches
Before you buy
A suspension lift raises the body relative to the axles, which opens room for bigger tires and more ground clearance. Before buying parts for a Wrangler, think about where the truck will be used. Daily driving, mild trails and rock crawling put different loads on control arms, shocks and the track bar, so match the parts to the terrain you run most often.
Changing ride height shifts driveline angles and front geometry, so the arms, bushings and track bar should be set up together. Expect to have the alignment checked after installation, and watch the rubber bushings closely during early trail use, since they wear faster when joints are pushed hard.
- Check bushings for cracking and wear at each service
- Re-torque fasteners after the first few trail runs
- Inspect shock mounts and sway-bar links for play
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C66130 |
| Lift kit | 4 to 6 inch suspension lift |
| Shock series | N3 |
| Front shocks | N3 |
| Rear shocks | N3 |
| Rear lift component | Coil spring |
| Track bar | Forged adjustable steel, 16 lb |
| Lift height range | 4 to 5.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions.
The Wrangler JK and JL generations are not on the list, and TJ and LJ years outside 1997–2006 and 2004–2006 are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Lifting a TJ or LJ changes the front geometry and driveline angles. Have the alignment checked after installation and confirm the driveline angles before off-road use, since articulation changes them quickly.
What’s included
X-Flex adjustable control arms, Clevite bushings, sway-bar quick disconnects, the forged adjustable track bar and N3 front and rear shocks.









