Overview
The Rock Krawler TJ35XFLA-5S01TT is a 3.5-inch X Factor long arm lift kit with a 5-inch stretch for the 1997 to 2006 Jeep Wrangler TJ. It covers the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions. The part number is RKSTJ35XFLA-5S01TT, and the shocks are RRD Spec twin tube units.
The system includes four triple rate coil springs and two RRD Spec twin tube front shocks with 11.6 inches of travel and a collapsed length of 16.2 inches. Two RRD Spec twin tube rear shocks have 10.8 inches of travel and a collapsed length of 16 inches. Four high misalignment, adjustable lower long arms, an adjustable front upper control arm and an adjustable high misalignment front track bar make up the suspension geometry. Two front adjustable sway bar disconnects and two front sway bar link straps are included.
Key features
- 3.5-inch lift with a 5-inch stretch long arm design
- Four triple rate coil springs
- Two RRD Spec twin tube front shocks, 11.6 inches of travel
- Two RRD Spec twin tube rear shocks, 10.8 inches of travel
- Four high misalignment adjustable lower long arms
- Adjustable front upper control arm and high misalignment front track bar
- Front adjustable sway bar disconnects and sway bar link straps
- Extended stainless steel brake lines
- Drop pitman arm and front track bar relocation bracket
Choosing a long arm setup
Long arm suspensions move the axle forward and keep wheel travel controlled at higher lifts, which is why stretch long arms are often chosen for trail use. The extra length changes the rear pinion angle and the front driveshaft angle, so the driveline should be measured once the kit is in. The stretch also lengthens the wheelbase slightly, which can change how the truck turns in tight spaces.
Shock and spring choice affects how the truck rides. Triple rate springs give a firmer feel at ride height and a progressive rate near full compression, which helps with weight and off-road loads. Regular inspection of the sway bar disconnects is useful when the truck is driven off road, because they can bind if the links are bent or the mounts have worn.
- Check the steering stabilizer for play after installation
- Inspect extended brake lines for chafing at the new routing
- Recheck the drop pitman arm alignment after tire changes
- Look for wear on the high misalignment track bar joints
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSTJ35XFLA-5S01TT |
| Lift size | 3.5 inches, per the product name |
| Front coil springs | Four triple rate |
| Front shocks | RRD Spec twin tube, 11.6 inches travel, 16.2 inches collapsed |
| Rear shocks | RRD Spec twin tube, 10.8 inches travel, 16 inches collapsed |
| Brake lines | Three extended stainless steel |
| Skid plate | Included, with mounting brackets |
| Fitment type | Direct fit |
Vehicle fitment
Covers 1997 to 2006 Jeep Wrangler TJ models in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions.
Wrangler models outside 1997 through 2006 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The long arms, the upper control arm and the front track bar change the alignment, so a wheel alignment belongs after installation. The drop pitman arm and the track bar relocation bracket form part of the front setup. Check the clearance of the rear 4-link arms and axle truss once the kit is in.
What’s included
The kit includes four triple rate coil springs, four RRD Spec twin tube shocks, four adjustable lower long arms, the front upper control arm, the high misalignment front track bar, the front sway bar disconnects and link straps, the skid plate, the rear 4-link arms and axle truss, three extended stainless brake lines, two extended rear sway bar links, the front and rear bump stops and the rear shock mounts.






