Overview
The Rubicon Express RE1895-265 is a bolt-on CV drive shaft, 26.5 inches long, for the 2005–2006 Jeep Wrangler Unlimited Rubicon (LJ). It is designed for use with Rubicon Express LJ long arm suspension systems and features 1330 and 1350 U-joints.
The RE1895-265 is a bolt-on CV drive shaft, 26.5 inches long, for the 2005-2006 Jeep Wrangler Unlimited Rubicon (LJ). It is a rear shaft, so compare its position with the shaft you are replacing.
Key features
- Direct, bolt-on CV drive shaft
- 26.5 inches long
- 1330 and 1350 U-joints
- Designed for Rubicon Express LJ long arm systems
- Requires a slip yoke eliminator
Long arm systems and shaft fit
Long arm suspension changes the angle and travel of the axle, so the driveline sees more movement than on a stock setup. A CV shaft handles that movement through its joints, but the length and joint angles still need to suit the rest of the system.
Because this shaft is a bolt-on part, the attachment points at the axle and at the transfer case should be checked against the old shaft before removal. Note the orientation and the fasteners. Make sure the slip yoke eliminator is sorted before installation if the transfer case needs one.
Check the shaft after the first few drives. Look for vibration, unusual noise or grease at the boots, and make sure the shaft has room at full travel. Drivelines on lifted Jeeps are often reviewed again after any suspension change, so plan to recheck the angles then.
- Compare the old shaft’s mounting points
- Note fastener orientation before removal
- Sort out the eliminator before installation
- Recheck after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1895-265 |
| UPC | 614901439472 |
| Length | Extended, 26.5 inches |
| Joint type | CV, with 1330 and 1350 U-joints |
| Transfer case | NP241OR |
| Position | Rear |
| Slip yoke eliminator | Required |
| Fitment type | Universal fit |
Vehicle fitment
It fits the 2005-2006 Jeep Wrangler (LJ) Unlimited Rubicon. Verify your model and trim before purchase.
The list does not include the Wrangler TJ, the LJ models other than the Unlimited Rubicon, or the JK. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A slip yoke eliminator is required with this shaft. The 26.5 inch length is designed for the Rubicon Express LJ long arm systems, so check the suspension setup before fitting.
What’s included
One CV drive shaft. Verify the included parts before starting the installation.



