Overview
The Rubicon Express drive shaft package is a 2-door front and rear driveshaft set for 2012 to 2017 JK Wrangler and Rubicon vehicles with an automatic transmission.
The shafts are Dana Spicer 1310 CV style driveshafts intended to replace the factory shafts on a lifted JK. Rubicon Express recommends the package for vehicles with 3.5 inches or more of lift.
Key features
- Dana Spicer 1310 CV style front and rear shafts
- Front and rear yoke flanges included
- 1310 U-joints
- Dynamically balanced to reduce vibration
- Billet aluminum flange
- Lengths from 15.5 to 38.5 inches
Driveline angles after a lift
Lifting a Jeep changes the angle of the driveshafts, and the joints at each end have to work through a wider range. Steep angles increase vibration and wear on U-joints or CV joints, and they can cause binding at full suspension travel. Angle and length are linked, so a shaft that fits at stock height may not be right after a lift. Checking the pinion and transfer case angles is part of any lift job.
Driveshaft components wear over time, especially the joints and slip yokes. Look for grease leaking from a boot, clicking on turns from a CV joint, or play at a joint with the vehicle supported. A bent shaft or damaged yoke causes shudder, and a shaft that is out of balance can vibrate at highway speed. Recheck the driveline after the first few drives, since the angles can settle as the suspension settles.
- Check pinion and transfer case angles after lifting
- Inspect CV boots for cracks and grease leaks
- Grease slip yokes if the shaft uses one
- Recheck the driveline after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| UPC | 700007978131 |
| Joint type | 1310 CV style |
| Length range | 15.5 to 38.5 inches |
| Body style | 2-door |
| Transmission | Automatic |
| Slip yoke eliminator | Not required |
| Fitment type | Universal fit, front and rear |
Vehicle fitment
This package fits 2-door JK Wrangler and Rubicon models from 2012 to 2017 with an automatic transmission.
It is made for 2-door models only. Check fit against your vehicle’s year, model and trim before ordering.
Installation notes
Run the shafts with the replacement transfer case yoke and flange that Rubicon Express designs for them. Lengths are for factory gasoline engines.
What’s included
The package includes the front and rear drive shafts and the yoke flanges.














