Select your vehicle
-13%

Rubicon Express Sway Bar End Links Rear TJ 3.5 Inch -4.5 – RE1155

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Extended rear sway bar end links for 3.5 to 4.5 inches of lift
  • Direct replacement for the stock rear end link, sold as a pair
  • Fits the Wrangler TJ, 1997-2006

Description

Overview

The Rubicon Express RE1155 is an extended rear sway bar end link, sold as a pair, for the Jeep Wrangler TJ. The TJ rear application is the 1997-2006 Wrangler. The links replace the stock unit directly and accommodate 3.5 to 5 inches of lift.

The links are non-adjustable and in the direct-fit, non-disconnect style. Because the lift range is given two ways, confirm the lift height and the rear sway bar setup for the vehicle before ordering.

Key features

  • Extended rear sway bar end link
  • Direct replacement for the stock unit
  • Accommodates 3.5 to 5 inches of lift
  • Sold as a pair
  • Non-adjustable length
  • Non-disconnect style

Lift height and link angle

Rear sway bar end links set how the bar moves as the axle travels, so a lift that changes the axle position also changes the link angle. Extended links are made to cover that change, but the angle still needs checking once the vehicle is back on its wheels. A link at the wrong angle can bind, limit travel, or load the bar unevenly.

When choosing a lift height and link setup, consider the rest of the rear suspension together. Shock length, spring height and the sway bar’s own mounting points all influence how the links sit. Links that are too long or too short for the geometry will change how the bar works on the trail and on the road.

Routine care is simple. Inspect the link ends and bushings for play, cracking or torn boots, and tighten fasteners after the first few trail runs. Replace worn links in pairs so both sides of the bar behave the same way.

  • Check link angle at full droop and full compression
  • Recheck fasteners after the first trail runs

Specifications

Brand Rubicon Express
Part number RE1155
UPC 614901437331
Position Rear
Lift 3.5 to 5 inch
Sold as Pair
Style Non-disconnect, non-adjustable

Vehicle fitment

These links fit the 1997-2006 Jeep Wrangler (TJ) rear sway bar. Confirm your vehicle’s year, model and trim before ordering.

Other Wrangler generations are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Extended end links change the sway bar angle at the new lift height, so check the bar’s position and the link angles after the install. Confirm the links clear the frame and the rear axle at full suspension travel.

What’s included

The package contains one pair of extended rear sway bar end links. Check the contents against your installation before starting.

SKU: R/ERE1155 Category:

Specification

Shipping weight 2.10 lbs
Package dimensions 11.00 × 3.30 × 1.50 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (TJ) likely fits1997–2006All

Vehicles marked "likely fits" are inferred from the product description rather than a manufacturer fitment list. Please confirm fitment with the manufacturer before ordering.

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RE1155 fit a 2003 Jeep Wrangler TJ?

Yes. The RE1155 is made for the Rear TJ application, and the TJ is the 1997-2006 Wrangler, so a 2003 model falls within that range. Confirm the trim before ordering.

How much lift does the RE1155 cover?

The links accommodate 3.5 to 5 inches of lift. Confirm the height for your build before installing, and check the link angles once the lift is in place.

Are the RE1155 links adjustable?

No. The links are non-adjustable and direct replacements for the stock unit, so their length is fixed by the part. Check the link angles after installing them.

Should both rear links be replaced together?

Yes, replacing both links together keeps the sway bar balanced on each side. Since the links are sold as a pair, a single worn link should be replaced alongside the other so the bar moves evenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon