Overview
The Rubicon Express RE1152 is a front sway bar end link kit for 2018–2026 Jeep Wrangler JL models with a 3.5 to 4.5 inch lift. The kit replaces the factory end links at the front and comes with urethane bushings, sleeves and the hardware needed to mount them.
Rubicon Express, founded in 1996, makes suspension and drivetrain parts for Jeep. This kit is a direct fit at the front and covers both 2-door and Unlimited 4-door JL models from 2018 to 2026.
Key features
- Built for Jeep Wrangler JL with a 3.5 to 4.5 inch lift
- Front position, direct fit
- Urethane bushings
- Sleeves for the bushing ends
- Mounting hardware included
Sway bar links and handling
The sway bar resists body roll by linking the two sides of the suspension. The end links transfer that force from the bar to the control arm or axle, so worn links can cause clunks over bumps and a looser feel in corners. When the lift changes the angle of the links, they can also load the bushings differently than the factory setup.
Urethane bushings are firmer than rubber and hold their shape well, but they can squeak if they are not greased or if the sleeves bind. Inspect the ends during regular service for play, torn boots or cracking. Replacing the end links in pairs keeps both sides matched and avoids uneven handling on the front axle.
- Listen for clunks over uneven ground
- Check for play at the link ends by hand
- Look for cracked or flattened bushings
- Tighten hardware to specification after the first drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1152 |
| Position | Front |
| Fitment | Direct fit |
| Lift range | 3.5 to 4.5 inch lift |
| Bushings | Urethane |
| Included hardware | Sleeves and hardware |
Vehicle fitment
It fits 2018–2026 Jeep Wrangler (JL) models: 2-door Rubicon, Sport and Sport S versions and 4-door Unlimited Rubicon, Sahara, Sport and Sport S versions, all with the 3.5 to 4.5 inch lift.
The list does not include the Jeep Wrangler JK or earlier Wranglers, the Gladiator (JT), or JL models with a different lift height. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit is made for a 3.5 to 4.5 inch lift, so confirm your lift height falls in that range before installing the end links. Check the front sway bar for clearance once the links are in place.
What’s included
Front sway bar end links, urethane bushings, sleeves and hardware.










