Select your vehicle
-13%

Rubicon Express Rear Coilover Shock Mount – RE4549

Rubicon Express

Shop Rubicon Express Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear coilover shock mount, part number RE4549, from Rubicon Express
  • Made in the USA from plate steel to maximize clearance
  • Rear coilover shock mount for Rubicon Express suspension builds
  • Confirm vehicle fitment for the year, model and axle before ordering.

Description

Overview

The Rubicon Express RE4549 is a rear coilover shock mount for off-road suspension builds. Rubicon Express makes it in the USA from plate steel to maximize clearance.

Rubicon Express describes coilover setups in general as a way to gain wheel travel and tune spring rate and damping. Its coilover design uses FOX threaded shock bodies, which let you fine-tune ride height, and dual coil springs that give a progressive spring rate: comfortable on the street and over small bumps on the trail, while still controlling large obstacles. Remote reservoirs add fluid capacity for cooler, steadier damping.

Key features

  • Rear position.
  • Plate steel construction, made in the USA
  • Designed to maximize clearance around the shock and coil spring
  • Rubicon Express coilover designs use threaded FOX shock bodies for ride height tuning

Rear coilover geometry

A rear coilover changes how the axle moves under load, so mount placement and shock angle matter. The spring seat, shock eye and frame attachment should line up without bind through full droop and compression. Rear coilovers on lifted builds often call for a driveshaft angle and brake line check, since the axle travels further from the chassis.

Before installation, check for clearance between the coil spring and the body or bracket, and confirm the mount does not interfere with the rear bumper or fuel tank. Inspect welds and bushings after the first few trail runs, since rear mounts take hard side loads when the axle articulates. Tighten all fasteners to the correct torque for your hardware after the first drive.

  • Check spring-to-body clearance at full droop
  • Verify shock eye and mount alignment
  • Re-torque bolts after initial trail use

Specifications

Brand Rubicon Express
Part number RE4549
UPC 614901218138
Position Rear
Material Plate steel
Country of manufacture USA

Vehicle fitment

This mount is not tied to a named vehicle, so match it to the model, year and axle of your build. Compare the mount to your coilover kit and the rear axle mounting points.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting, since bolts and brackets may need to be sourced separately.

SKU: R/ERE4549 Category:

Specification

Shipping weight 28.00 lbs
Package dimensions 30.00 × 24.00 × 10.00 in
brands

Questions & Answers

Who makes the Rubicon Express RE4549?

Rubicon Express makes the RE4549 rear coilover shock mount. It is made in the USA from plate steel and designed to maximize clearance.

Which vehicles does the RE4549 fit?

No vehicle is named for this mount and no fitment list is provided. Check Rubicon Express specifications for the year, model and axle your vehicle uses.

Does the mount come with remote reservoirs?

Remote reservoirs are a feature of Rubicon Express coilover designs, so confirm whether your coilover shock comes with one before ordering.

Can a rear coilover mount be used with other suspension upgrades?

It can, but the mount must match the axle, the coilover and the frame mounting points. Upgrades such as a higher lift, longer control arms or a new driveshaft can change the geometry, so check the rear suspension as a whole after each change.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rubicon Express Shock Absorbers on Amazon