Overview
The Rubicon Express 2.5-inch Extreme-Duty Monotube Front Shock, part number RXJ906, is a hydraulic monotube shock for the 2020–2026 Jeep Gladiator. Rubicon Express says each part number is tuned to match its vehicle application.
The body is hard-anodized, thick-wall aluminum impact forging. The aluminum dissipates heat quickly, and the anodizing reduces friction and bore wear and avoids the rust that steel bodies can develop. The shaft is 17-4 stainless steel, precipitation hardened and chrome plated for corrosion and abrasion resistance.
Key features
- Hard-anodized aluminum forging body
- 17-4 stainless steel precipitation hardened shaft, chrome plated
- Thick wall steel sleeves inside cross-linked urethane bushings
- 2.5-inch body diameter
- Monotube design, hydraulic
- Eyelet top and bottom mounts
- Front position
- Each part number tuned to its vehicle application
Front shock upkeep
A front shock works hardest during steering and braking, so its mounts, bushings and seals see more movement than the rear units. Over time, eyelet bushings can wear and allow play, which shows up as clunking over small bumps or a loose feel on the steering. Look for oil film on the shaft, dents in the body near the mounts, and uneven tire wear that may point to a damper that is no longer controlling the wheel.
When replacing a front shock, it is common to check the mounting hardware and the other front dampers at the same time. Shocks that work in pairs keep the front end balanced, so replacing one side and leaving a heavily worn unit on the other can change how the vehicle steers.
- Check for oil on the shaft or body
- Inspect eyelet bushings for play
- Look for uneven front tire wear
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXJ906 |
| Series | Extreme-Duty Mono-Tube |
| Position | Front |
| Shock type | Monotube, hydraulic |
| Body diameter | 2.5 inches |
| Body material | Hard-anodized aluminum |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Shaft | 17-4 stainless steel, precipitation hardened, chrome plated |
| Bushings | Cross-linked urethane with steel sleeves |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator across its trims.
The fitment data covers only the Gladiator, so other Jeep models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The RXJ906 is a front shock, so it replaces the front shock on the 2020–2026 Jeep Gladiator rather than a rear one. Rubicon Express says each part number is tuned to match its vehicle application, so use the RXJ906 part number for the stated years and not a general-purpose shock.
The aluminum body dissipates heat quickly, which matters most on long off-road runs. The chrome plated stainless shaft resists corrosion and abrasion from trail debris.
















