Overview
The Rubicon Express RXT Twin-Tube Shock Absorber, part number RXT2220B, has eyelet-to-eyelet mounts and a 9-inch stroke. It measures 22.5 inches extended and 13.5 inches collapsed.
The 1.625-inch piston provides control, and the 11/16-inch chrome shaft adds strength. The oversized body adds fluid capacity, and double welded rings add durability.
Key features
- 1.625-inch piston
- 11/16-inch chrome shaft
- Oversized shock body
- Double welded rings
- Gas charged, per the specifications
Twin-tube design and mounts
A twin-tube shock has an inner pressure tube and an outer reserve tube, with fluid flow controlled by the piston valving. The piston and shaft carry the load, so the size of each part affects how the shock holds up under side loads. Double welded rings help the eyelets resist fatigue, which matters on rocky trails where the shock takes frequent impacts.
Eyelet mounts pin the shock at both ends and suit many off-road setups, but they can rotate or bind when the bushings are worn. Measure the mounted length against the old shock before ordering, and compare the collapsed length with the bump stop position. Replace worn bushings and bolts together so the new shock is not carrying play from the old mount.
- Compare mounted length with the old shock
- Inspect eyelet bushings for play
- Replace worn hardware at the same time
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXT2220B |
| UPC | 614901453768 |
| Shock series | RXT Twin-Tube |
| Extended length | 22.5 inches |
| Collapsed length | 13.5 inches |
| Stroke | 9.0 inches |
| Mounts | Eyelet to eyelet |
Vehicle fitment
Confirm fit for your vehicle’s year, model, trim and mount type before ordering.
Installation notes
The eyelet-to-eyelet mounts should match the existing mounts on your vehicle before the shock is installed.




