Overview
The Rubicon Express RXP902 is a rear 2.5-inch piggyback reservoir shock designed for 2.5 to 3.5-inch lifts. Its part number is R/ERXP902. It is a monotube shock with an external reservoir and eyelet mounts at the top and bottom. It fits the 2020–2026 Jeep Gladiator, the 2018 Jeep Wrangler JK and the 2018–2026 Jeep Wrangler JL.
The shock is a monotube design with an external reservoir, intended to offer more consistent performance than twin tube hydraulic shocks. Vehicle-specific ride tuning was developed through dyno and real-world testing, using multi-stage valving to balance ride quality and handling for the application.
The powder-coated monotube body is nitrogen gas charged to help prevent cavitation during compression and rebound. The external reservoir adds fluid capacity and improves heat dissipation, which helps reduce shock fade. Both mounts are eyelets.
Key features
- 2.5-inch body diameter
- Piggyback external reservoir
- Nitrogen-charged, powder-coated monotube body
- Multi-stage valving tuned to the vehicle
- Eyelet top and bottom mounts
- Designed for 2.5 to 3.5-inch lifts
Heat and reservoir care
Shock fade happens when damping drops because the fluid and body get too hot. It is most common on long descents or repeated climbs, where the shock absorbs energy continuously. An external reservoir adds oil volume and surface area, helping the shock stay cooler under those conditions.
Reservoir shocks need a bit more attention at installation. Route the hose away from heat sources and moving parts, and make sure the reservoir has room to move without rubbing the tire or body. Check the eyelets and mounts after the first few drives, since loose hardware can change how the shock loads.
- Keep the reservoir free of mud and rock packing
- Check the hose fitting for weeping oil
- Watch for fade on long descents
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXP902 (R/ERXP902) |
| Series | 2.5 piggyback reservoir |
| Body diameter | 2.5 inches |
| Position | Rear |
| Lift range | 2.5 to 3.5 inches |
| Shock type | Piggyback monotube, hydraulic, gas charged |
| Top and bottom mount | Eyelet |
| Fitment type | Direct fit |
Vehicle fitment
The covered vehicles are the 2020–2026 Jeep Gladiator (Launch Edition, Overland, Rubicon, Sport and Sport S trims), the 2018 Jeep Wrangler JK (two-door Rubicon, Sahara and Sport; four-door Unlimited Rubicon, Unlimited Sahara and Unlimited Sport) and the 2018–2026 Jeep Wrangler JL.
Other Wrangler and Gladiator years and other Jeep models fall outside that coverage. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear piggyback reservoir shock absorber.






