Select your vehicle
-13%

Rubicon Express Mono-Tube Shock Absorber – RXJ704B

Rubicon Express

Shop Jeep Wrangler TJ Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear Extreme-Duty mono-tube shock for the 1997-2006 Jeep Wrangler (TJ)
  • Gas charged mono-tube design, extended length 23.8 inches, collapsed 14.8 inches
  • Designed for a 2 to 3.5 inch lift range
  • Part number RXJ704B, sold as each

Description

Overview

The Rubicon Express RXJ704B is a rear Extreme-Duty mono-tube shock for the 1997–2006 Jeep Wrangler (TJ). It fits the TJ across its trims and covers a 2 to 3.5 inch lift range.

Rubicon Express says its Extreme-Duty mono-tube shocks are developed and tuned for each application, so the damping is set for the vehicle rather than a general fit. The aim is to keep control on the toughest terrain while holding ride quality, high-speed stability and comfort on long trips. The shock is gas charged, with an extended length of 23.8 inches and a collapsed length of 14.8 inches.

Key features

  • Mono-tube design, gas charged
  • Extreme-Duty construction for rough terrain
  • Tuned to the specific application
  • Rear position
  • 2 to 3.5 inch lift range

Choosing by length and travel

A rear shock’s length determines whether it can reach both mounts at full droop and full compression. Before buying, compare the extended and collapsed lengths with the shock you are removing, and consider how much the suspension is articulating on the trail. A shock that is too short can bottom out, while one that is too long can strain the mounts.

Rear shocks on a TJ work with the leaf or coil springs and the axle, so the damping should suit the load and the terrain you drive. Replacing both rear units together keeps the rear end balanced. Inspect the upper and lower mounts for cracked rubber or worn holes when the shocks are changed.

  • Compare extended and collapsed length with the old shock
  • Replace both rear shocks together
  • Check mounts for cracked bushings or elongated holes
  • Confirm the lift range matches your suspension

Specifications

Brand Rubicon Express
Part number RXJ704B
UPC 614901451801
Series Extreme-Duty Mono-Tube
Position Rear
Extended length 23.8 inches
Collapsed length 14.8 inches
Lift range 2 to 3.5 inches
Gas charged Yes
Fitment type Direct fit
Sold as Each

Vehicle fitment

It fits the 1997–2006 Jeep Wrangler (TJ) across its trims. Confirm your vehicle’s year, model and trim before ordering.

The fitment data does not include the Wrangler (YJ), the 2007–2018 Wrangler (JK) or the 2018–2022 Wrangler (JL). Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear shock absorber, sold as each.

SKU: R/ERXJ704B Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 36.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Rubicon Express RXJ704B fit a 2007 Jeep Wrangler JK?

No. It fits the 1997–2006 Jeep Wrangler (TJ) only, so the 2007–2018 Wrangler (JK) is outside its coverage. Confirm the model year of your own vehicle before choosing this shock.

What lift range is this rear shock built for?

The shock is built for a 2 to 3.5 inch lift range. Its extended length is 23.8 inches and its collapsed length is 14.8 inches, so shock length matters as much as lift height.

Is the RXJ704B gas charged?

Yes. It is gas charged, with a mono-tube body. The Extreme-Duty mono-tube shocks are developed and tuned for each application rather than built to one general setting.

Do rear shocks need to match on both sides?

Yes, in most cases. Matched rear shocks keep damping even across the axle, which helps the vehicle track straight and reduces side-to-side sway. Replacing both rear units at the same time is the usual approach.

How often should shock mounts be inspected?

Inspect the mounts when you change tires, service the brakes, or after hard off-road use. Look for cracked rubber, loose fasteners and elongated holes, since a loose mount can cause noise and reduce shock control.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Shock Absorbers on Amazon