Overview
The Energy Suspension 8.9102R is a rear bump stop set in red. Bump stops limit suspension compression at the end of travel, helping protect shocks and springs when the suspension bottoms out.
This is a rear position part. Confirm fit for your vehicle’s year, model and trim before ordering.
Choosing and fitting bump stops
Bump stops are the last point of control when a suspension compresses fully. Once the spring has used its travel, the bump stop takes the load and keeps metal parts, such as the shock body and mounts, from striking each other. Over time the urethane or rubber in a bump stop can crack, flatten or split, especially where dirt and road salt collect. A worn or missing stop can let the axle hit the frame during hard landings, so inspection after off-road use is worth the time.
When choosing a set, the most useful check is the installed position. Front and rear stops often differ in height and mounting style, so confirm the position before ordering. If you have added a lift or changed spring rates, the stops may no longer reach the right point in travel, so check clearance at full compression after any change.
- Inspect for cracks, flattening and tears
- Clean grit from the mounting surface before installing
- Check clearance at full compression after a lift
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 8.9102R |
| UPC | 703639104049 |
| Color | Red |
| Position | Rear |
| Sold as | Set |
Vehicle fitment
Install it in the rear position only. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One set of bump stops. Check the package contents against your installation before starting.









