Overview
The Omix-ADA Rear Axle Snubber, part number 18280.09, is a rubber rear axle bump stop sold individually.
Omix-ADA builds its parts as direct OE replacement Jeep parts to the original specifications, with a limited five year warranty. A snubber, also called a bump stop, is a rubber stop that limits axle travel.
Key features
- Rear axle snubber, also called a bump stop
- Rubber material
- Sold as each
- Direct OE replacement part built to original specifications
- Limited five year warranty
Bump stops and axle travel
A rear bump stop is a rubber cushion that limits how far the axle can travel toward the body. When the suspension compresses hard, the stop takes the impact instead of the shock, springs or axle housing. A worn stop that has cracked or flattened can let the axle hit metal at full compression.
Stops usually wear with age and heat, and off-road use can speed that up. Check the rubber for cracks, crumbling or flattening, and look at the mount for loose or damaged hardware. When replacing a stop, inspect the nearby shock mounts and brake lines too, since they share the same travel path. Suspension parts like these are often serviced together.
- Look for cracks, chunks or flattening in the rubber
- Check the mount and hardware for looseness
- Inspect brake lines and hoses near the axle
- Consider the shocks and springs during the same service
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18280.09 |
| UPC | 804314050382 |
| Product type | Rear axle snubber (rubber bump) |
| Material | Rubber |
| Position | Rear axle |
| Sold as | Each |
| Fitment type | Direct fit |
| Warranty stated | Limited five year |
Vehicle fitment
Confirm fit for your Jeep’s year, model and trim before ordering.
Do not assume this snubber fits a particular Jeep model or year.
Installation notes
Suspension, steering and brake parts are safety-critical, so professional installation is a good choice. Support the vehicle on rated jack stands, never on a jack alone. Tighten all fasteners to torque values for your vehicle. Re-check fasteners after the first miles of driving and after off-road use. Have the alignment checked after any suspension or steering work, and confirm brake lines, hoses and wiring clear suspension travel.
What’s included
One rubber rear axle snubber.
Not included: Mounting hardware may be needed, so check the package contents before starting.








