Overview
The Rubicon Express RE1898-155 is a CVF rear drive shaft in extended length. It is designed for use with the RE1807 and RE1801 slip yoke eliminator kits and with Currie Enterprises tail shaft conversion kits, and it requires a slip yoke eliminator.
It is a universal fit shaft, so the length has to come from your own driveline. Measure from the flange face to the center of the rear U-joint, with the slip stub at the center of its travel and the vehicle on the ground in the running position.
Key features
- CV rear drive shaft
- Extended length
- Compatible with RE1807 and RE1801 slip yoke eliminator kits
- Compatible with Currie Enterprises tail shaft conversion kits
- Requires a slip yoke eliminator
Driveline angles and balance
A CV rear shaft handles changing driveline angles better than a traditional U-joint shaft when the suspension cycles over rough ground. That matters most in an extended-length build, where the shaft spans more distance and the joint angles can shift as the axle moves. Before you install, look at the pinion angle and transfer case output height, since both set how much angle the joint sees at ride height.
Balance matters at highway speeds. Any change in length or added weight from a conversion can introduce vibration, so inspect the shaft after the first few drives. Check the flange bolts and the slip stub seal, and look for grease or play in the CV joint boot. Replace a worn boot before it fails, since dirt entering the joint shortens its life.
- Re-torque flange bolts after the first few drives
- Inspect the CV boot for cracks or grease loss
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1898-155 |
| UPC | 614901439489 |
| Joint type | CV |
| Length | Extended |
| Position | Rear |
| Fitment | Universal fit |
| Slip yoke eliminator | Required |
| Measured from | Flange face to center of rear U-joint |
Vehicle fitment
No vehicle is named for this universal fit shaft. It is meant for builds that use one of the compatible eliminator or tail shaft conversion kits.
Confirm your vehicle’s year, model and trim before ordering, and make sure the eliminator or conversion kit you use is one of the compatible kits.

