Overview
The Rubicon Express RE4542 is a fixed Super-Flex lower control arm for a 3-link suspension, used at the rear lower position. It works with the 3-link kit from the same line and fits the 2007-2018 Jeep Wrangler JK.
Each arm uses a rebuildable spherical bearing assembly. The bearing allows extra flex for off-road use while keeping on-road handling and long-term durability in line with the brand’s other arms.
Key features
- Super-Flex fixed lower control arm
- Rebuildable spherical bearing assembly
- 2.25-inch polymer race surrounding a 1.75-inch hard plated steel bearing
- Threaded steel insert for adjustable preload
- Greaseable, with non-metallic races for quiet operation
Greasing and preload checks
A spherical bearing in a control arm works through a wide range of angles, so its condition shows up as play and stiffness long before failure. Keeping the bearing greased and the preload set correctly protects the joint from dirt and water, which are the main causes of early wear on off-road setups.
Set preload during installation, then grease the bearing before the arm goes into service. After trail use in mud or water, grease again to push out contamination. Check for free movement and listen for grinding each time the suspension is serviced.
- Grease after every trail session in water or mud
- Check for play with the arm loaded and unloaded
- Look for torn boots or damaged seals
- Recheck preload after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4542 |
| UPC | 614901453348 |
| Position | Rear lower |
| Arm type | Fixed Super-Flex control arm, 3-link |
| Bearing | Spherical, 2.25 in polymer race, 1.75 in steel bearing |
| Preload | Adjustable through threaded steel insert |
| Lubrication | Greaseable |
| Body style | 2-door and 4-door |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler JK. Confirm fit for your vehicle’s year, model and trim before ordering, especially if you are considering it for another Wrangler or Cherokee model.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bearing preload is set through the threaded insert, so set it during installation and grease the bearing once it is in place. Check the arm length and angle against your 3-link kit before tightening the mounts.
What’s included
One fixed Super-Flex control arm for a 3-link system.
Not included: the 3-link kit, the other arms and the mounting hardware.
