Overview
The Rubicon Express RE4546 is a rear adjustable lower control arm for a 4-link suspension, sold as a pair. It is an extreme-duty arm with durable tubular construction, designed to replace control arms that a trail has bent or damaged.
The arm’s length can be adjusted to set the suspension geometry for your setup. It is a direct fit for the rear lower position. Confirm the mounting points on your truck before ordering.
Key features
- Adjustable length for setting the arm to your suspension geometry
- Durable tubular construction
- Extreme-duty design for trail use
- Sold as a pair
Setting arm length
Adjustable control arms change the pinion angle and the ride geometry each time their length is changed. Setting the length is a balance between correct axle position and the angle the driveline can accept, so make small changes and measure after each one. Lock the jam nuts once the length is set, and check that the threads are fully engaged on both ends.
Tubular arms are generally strong, but the bushings and ends still wear over time. Inspect the pivot ends for play and look for cracks near the welds after hard trail use. Keep the arms in matching lengths on both sides so the axle stays square under load.
Expect the setup to settle after the first few drives. Recheck the jam nuts and pivot hardware, then have the alignment and driveline angles checked again.
- Make small length changes and measure after each one
- Recheck jam nuts after the first trail runs
- Keep left and right arms at matching lengths
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4546 |
| UPC | 614901453515 |
| Product type | Control arm, adjustable length |
| Position | Rear lower |
| Suspension type | 4-link |
| Construction | Tubular |
| Sold as | Pair |
Vehicle fitment
It is a direct fit for the rear lower position. Check the frame and axle mounting points on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjustable control arms change the pinion angle and ride geometry when their length is set. Set the length to suit your suspension, then have the alignment and driveline angles checked after installation.
What’s included
Each order is sold as a pair. Bushings, hardware and the mounting parts aren’t itemized, so confirm them with Rubicon Express before ordering.
