Overview
The Rubicon Express RE8003T is a 3.5 inch Super-Flex short arm lift kit with twin tube shocks for the 1993–1998 Jeep Grand Cherokee ZJ. The lift height range is 3 to 4.99 inches, and the shocks are included.
The kit replaces the stock suspension with Rubicon Express components for Grand Cherokees that run factory short arm geometry. It adds an adjustable front track bar, adjustable upper and lower rear control arms, Super-Flex spherical ball joints, replacement lift springs and Gen II sway bar disconnects.
The system keeps the factory short arm design and uses the factory suspension mounting points, giving a smoother, more flexible ride on and off the trail.
Key features
- 3.5 inch Super-Flex short arm system
- Twin tube shocks included
- Adjustable front track bar
- Adjustable upper and lower rear control arms
- Super-Flex spherical ball joints
- Replacement lift springs
- Gen II sway bar disconnects
Front track bar and steering
The adjustable front track bar keeps the front axle centered under the body as the suspension moves. On a short arm lift, that steering geometry is most important on uneven ground, where the axle can shift if the bar is worn or set wrong. Set the length carefully after installation so the wheels track straight.
Super-Flex spherical ball joints give the suspension more freedom than rubber bushings, which helps on rough trails. Inspect the joints for play and for dust seals that have split. Gen II sway bar disconnects let the bar decouple for articulation and reconnect for highway use; check that the latch engages fully every time.
Keep an eye on steering response and tire wear after the install, since small changes in track bar length can show up in both.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE8003T |
| UPC | 614901453270 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Kit type | Super-Flex short arm |
| Rear lift method | Coil springs |
| Shocks included | Yes, twin tube |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1993–1998 Jeep Grand Cherokee (ZJ), including the Limited, Laredo, SE and TSi models.
Fit covers 1993–1998 ZJ only. Compare year, model and trim with your own vehicle before buying.
Installation notes
The rear control arms and the front track bar are replaced, so an alignment is needed once the kit is installed. The factory mounting points are used, which keeps the short arm layout in place.
What’s included
The kit includes twin tube shocks, an adjustable front track bar, adjustable upper and lower rear control arms with Super-Flex spherical ball joints, replacement lift springs and Gen II sway bar disconnects.



