Overview
The Rubicon Express RE7125M is a 3.5 inch sport lift kit with monotube shocks. It is a short arm sport system with replacement coil springs and control arm geometry correction brackets.
The kit is built for 2-door models. Confirm fit for your vehicle before ordering, including body style. The lift height range is 3 to 4.99 inches.
The kit is made in the USA and can be upgraded to a Super-Flex system later.
Key features
- 3.5 inch lift with a listed range of 3 to 4.99 inches
- Monotube shocks included
- Replacement front and rear coil springs
- High steer kit and control arm geometry correction brackets
- Rear cam bolts for pinion adjustment
- Bump stops, a rear track bar bracket and extended sway bar end links
- Easily upgradeable to a Super-Flex system
Installing a sport kit
A sport lift with replacement coil springs changes the ride height and the angles of the front and rear suspension, so the work usually goes with an alignment. The kit includes a high steer kit and control arm geometry correction brackets, which help set the steering geometry after the lift.
Plan the install in order: remove the old springs and shocks, fit the brackets and bump stops, set cam bolts for pinion angle, then torque the fasteners. Recheck the bolts after the first few trail runs, and look for worn bushings and cracked welds around the brackets.
Owners who plan a later upgrade should check which parts carry over. A Super-Flex system uses different arms and joints, so the sport kit’s brackets may be replaced at that point.
- Torque all fasteners after the first drive
- Check pinion angle with the cam bolts
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7125M |
| UPC | 700007257331 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Sport short arm kit |
| Rear lift method | Coil springs |
| Shocks included | Yes, monotube |
| Body style | 2-door models |
| Country of manufacture | USA |
Vehicle fitment
Confirm fit for your make, model, year and trim before ordering; this kit is for 2-door models.
It is for 2-door models. Check your body style, year, model and trim before buying.
Installation notes
Lift kits change alignment and driveline angles, so an alignment and a driveline check are needed after installation. The high steer kit and control arm geometry correction brackets are included, so they are part of the installation.
What’s included
The kit includes a high steer kit, control arm geometry correction brackets, rear cam bolts, bump stops, a rear track bar bracket, extended sway bar end links, 3.5-inch front and rear replacement coil springs and monotube shocks.






