Overview
The Rubicon Express RE6165 is a 2 inch economy lift kit with rear lift blocks, U-bolts and twin tube shocks, made for the Jeep Cherokee XJ. The kit keeps the factory coil springs and adds spacers at the front, so the vehicle is raised without replacing the main suspension parts.
This is the 2 inch standard system for the XJ, suited to owners who want a noticeable increase in height with a straightforward installation. It sits in the economy lift range.
Precision valved twin tube shocks are included, and an Advantage Lifetime Warranty applies to the kit.
Key features
- 2 inch lift using the factory coil springs
- Front 1.75-inch coil spacers
- Rear lift blocks with U-bolts
- Precision valved twin tube shocks
- Stainless steel rear brake line
- Rubicon Express Advantage Lifetime Warranty listed
- Installation uses front spacers and rear blocks with U-bolts
Before you buy
A spacer and block lift changes ride height while the factory coil springs and axles keep doing their original work. The raised stance changes the angle of the control arms, the steering linkage and the driveline, so the vehicle may feel different over ruts and washboard roads. Owners who drive mostly on pavement usually notice little change in handling, while those who take the vehicle off-road should expect more movement from the stock springs on uneven ground.
Rear lift blocks work with the U-bolts, so check the axle housing and U-bolt condition at installation. Shocks, bushings and steering components are often replaced at the same time because the raised stance puts more angle on them. After the first few drives, re-check the U-bolt nuts and the brake line routing.
- Inspect shocks, bushings and tie rod ends for wear
- Check tire clearance at full steering lock
- Re-tighten U-bolt nuts after the first drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE6165 |
| UPC | 614901441536 |
| Lift height | 2 inch |
| Suspension type | Spacer |
| Kit type | Economy kit |
| Lift method | Front coil spacers and rear lift blocks with U-bolts |
| Shocks included | Yes, twin tube |
| Fitment | Direct fit |
Vehicle fitment
This kit fits 1984–2001 Jeep Cherokee (XJ) models.
Confirm fit against your vehicle’s year, model and trim before ordering, especially for a later Cherokee KL or XL, Grand Cherokee or Wrangler.
Installation notes
Because the kit keeps the factory coil springs, the front spacers and rear blocks change the ride height only. Any lift changes alignment, so have the alignment checked after installation.
What’s included
The kit includes front coil spacers, rear lift blocks with U-bolts, precision valved twin tube shocks and a stainless steel rear brake line.


