Overview
The RE4010 is a passenger side front lower adjustable long arm from the Extreme-Duty line. It is sold as a single arm for the front lower position. It is used with RE4020 arms to convert a factory four link to a radius arm design.
The arm is built from 2-inch by 1/4-inch wall 4130 chromoly. Its Super-Flex joints allow more axle articulation, and the arm is designed to improve ride, handling and driveline geometry on a lifted Jeep.
Key features
- Passenger side front lower long arm
- Adjustable length
- Super-Flex joints for increased axle articulation
- Constructed from 2-inch by 1/4-inch wall 4130 chromoly
- Gray powder coat finish
Radius arm setup basics
A radius arm setup replaces a factory four link with long arms that control the axle’s forward and backward movement. The arms carry braking and acceleration loads, so the mounts and joints see steady force. Using matched pairs keeps the axle square and the driveline working as intended. Many builders replace the rest of the axle links at the same time for a balanced setup.
Adjustable arms let you set the length for the vehicle’s ride height, but both sides need the same setting. Check the joints for play and the arms for bends after rough trail use. Super-Flex joints should be checked for wear on a regular schedule, and any worn part should be replaced in a matched set.
- Set both sides to the same length
- Recheck settings after the first few drives
- Inspect joints for play before each trip
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4010 |
| UPC | 614901441031 |
| Position | Passenger side, front lower |
| Arm type | Long arm, adjustable |
| Material | 4130 chromoly, 2 in x 1/4 in wall |
| Joints | Super-Flex |
| Finish | Gray powder coat |
| Quantity | Single |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering, since this arm is part of a matched radius arm setup.
The arm is designed to pair with the RE4020 arms for a radius arm setup, so those parts are needed as well. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the arm is used with its matching driver side part to form a radius arm setup, set both sides to the same length and angle before the vehicle is driven.
What’s included
One passenger side front lower adjustable long arm.
Not included: the driver side arm and the mounting hardware.







