Overview
The Rubicon Express HWC10317 is a control arm hardware kit made for use with the extreme duty control arms RE4000 and RE4010.
Check the package contents against your installation before starting.
Hardware and torque care
Control arm hardware keeps the arm fastened to its brackets under heavy load, so the fasteners should be in good condition before the kit is used. Look for stretched bolts, corroded threads, damaged washers and nuts that spin freely. Any fastener that is damaged should be replaced rather than reused.
Torque each fastener to the value in your service manual, and use a torque wrench for an accurate result. Lubricate threads only if the instructions call for it, since lubrication changes the torque reading. Mark the fasteners after tightening so you can see at a glance whether any have moved.
Recheck the hardware after the first few drives and after each off-road outing. Loose hardware often shows up as clunks, steering wander or a shifting arm, so a quick check at the start of each season is a sensible habit.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | HWC10317 |
| UPC | 614901451504 |
| Type | Control arm hardware kit |
| Used with | Extreme duty control arms RE4000 and RE4010 |
Vehicle fitment
Match the kit to the RE4000 or RE4010 arm on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.



