Overview
The Rubicon Express RE5015T is a spring-over axle conversion lift kit that moves the leaf spring perches to the top of the axle, with twin tube shocks included. With stock-height springs, the conversion gives a net lift increase of at least 5.5 inches and keeps the factory ride quality. It fits the 1987-1995 Jeep Wrangler (YJ) and suits owners comfortable with fabrication work.
The kit has the parts needed to move the leaf spring perch to the top of the axle. Installation involves removing the original spring perches and welding in new perches. A CV-type drive shaft is recommended, and steering modifications are needed on a spring-over conversion. Pairing the kit with the RE1445 and RE1444 Extreme-Duty leaf springs brings the total lift to 7 inches and adds durability.
Key features
- 5.5-inch minimum net lift with stock-height springs
- Spring-over conversion moves the leaf spring perches to the top of the axle
- Twin tube shocks included
- Spring perches and spring plates included
- Brake lines and drop pitman arm included
- Instructions and hardware included
Steering and driveline changes
A spring-over conversion moves the axle to the top of the spring pack, which changes how the steering and drive shaft angles work. The steering linkage typically needs attention, and the drop pitman arm included in the kit helps address the geometry. A CV-type drive shaft handles changed angles better than a standard shaft, so it is a common addition alongside this kit.
Check the spring perches, plates and welds for cracks or movement after the first few drives, since the load path runs through them. Look at the brake lines for kinks or stretch once the axle has moved. Keep the steering components and tie rods inspected, because a spring-over setup can change steering feel and wear rates.
- Welds on the new spring perches
- Brake lines checked for stretch or kinks
- Steering linkage play
- Drive shaft angles and CV joints
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE5015T |
| UPC | 614901453034 |
| Kit type | Spring-over axle conversion |
| Lift height | 5.5 inches minimum net (chart range 5 to 6.99 inches) |
| Included parts | Spring perches, spring plates, brake lines, drop pitman arm |
| Shocks | Twin tube, included |
Vehicle fitment
It fits the 1987-1995 Jeep Wrangler (YJ) across several trim names.
The TJ, JK and JL generations are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation involves removing the original spring perches and welding new perches, along with other adjustments. Steering modifications are needed, and a CV-type drive shaft is recommended.
What’s included
The kit includes spring perches, spring plates, brake lines, a drop pitman arm, twin tube shocks, instructions and hardware.
Steering modifications are needed on a spring-over conversion, and a CV-type drive shaft is advised for this kit.


