Overview
The Rubicon Express JT7100E is a 2.5 to 3.5 inch standard arm suspension lift kit with shock extensions for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the Gladiator trims covered by this kit.
The kit uses coil springs at the rear, with a lift height range of 0 to 3.5 inches and a 35-inch tire size listed. The specifications mark shocks as included but list no shock series, front shock or rear shock brand.
The kit is a bolt-on design that improves street handling and off-road capability. It makes room for 37-inch tall tires without changing driveshafts or modifying exhaust or brake lines.
The factory springs and dampers are retained under the new coil spring setup.
Key features
- 2.5 to 3.5 inch standard arm suspension lift
- Shock extensions.
- Coil spring rear lift method
- Bolt-on design, per the brand
- Clearance for 37-inch tall tires.
Shock extensions explained
Shock extensions lengthen the mounting points so a shock can work at a longer effective length after a lift. Because the shock stroke is fixed, extensions shift where the shock sits in its travel, which can reduce available compression or rebound if they are set too long. Measure the shock’s collapsed and extended length before and after installation, and keep the mounting hardware torqued.
Coil spring lifts often leave the factory dampers in place, so the shock setup deserves attention even if the springs are the main change. Look for oil on the shock body, bushings that have worn flat, or any clicking at the mounts. Front-end alignment and the steering should be checked, since a lift changes the geometry the shocks help control. Replacing worn shocks with ones that suit the new ride height is a common next step.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7100E (JT7100E) |
| Kit type | Standard arm suspension lift kit with shock extensions |
| Lift | 2.5 to 3.5 inch |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Front shocks | None listed |
| Rear shocks | None listed |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2020–2026 Jeep Gladiator JT in the 80th Anniversary, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
The list covers the Gladiator JT from 2020 through 2026 only, so the Wrangler and earlier Gladiator years are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shock extensions change the length the shocks operate at, so the shock travel and the alignment should be checked after the install.
What’s included
The kit includes the standard arm lift components and shock extensions. Confirm that your shocks suit the extension length before installation.














