Overview
The Rubicon Express 4.5 Inch Extreme-Duty Long Arm Lift Kit with Rear Track Bar and Twin Tube Shocks (part number RE7204T) is a long arm suspension lift for the 1997–2002 Jeep Wrangler TJ. It includes twin tube shocks, and the stated lift height range is 3 to 4.99 inches.
The Extreme-Duty long arm system is a complete suspension replacement. The longer arms are designed to improve stability, reduce torque roll and add trail traction compared with standard short arm lifts.
Twin tube shocks come with this kit, which means the shock length and mounting points are matched to the 3 to 4.99 inch lift range. Twin tube designs are a common, economical shock type, and the stainless front and rear brake lines are supplied as part of the package, so the brake lines are not a separate purchase. Plan on checking clearance between the new arms and the shock mounts once the kit is installed.
Key features
- Twin tube shocks included
- Chromoly long control arms
- PT-Meg Super-Ride bushings
- Adjustable control arms with Super-Flex spherical ball joints
- Tuned lift springs
- Front and rear stainless brake lines
- Rear track bar and three-piece belly pan
Clearance and shock fit
Twin tube shocks are a common design with a working cylinder inside a reserve tube, and they suit a lift where the shock length has been matched to the arms. Once the new arms are in, check that the shock mounts clear the arms and body at full compression and full droop, since the geometry changes the shock angle.
Brake line routing also deserves attention once the arms are in. The lines are fitted with the kit, but they should still be checked for slack and rubbing. Setting the alignment after the shocks and lines are in place keeps the new geometry where it was designed to be.
- Check shock mount clearance at full travel
- Look for rubbing where lines pass the arms
- Set alignment after all parts are fitted
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7204T |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Extreme-Duty long arm |
| Shock absorbers | Twin tube, included |
| Brake lines | Front and rear stainless |
| Fitment type | Direct fit |
Vehicle fitment
The kit is built for the 1997–2002 Jeep Wrangler (TJ) in its SE, Sahara, Sport and X models.
The 2003–2006 TJ and the LJ Unlimited are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The twin tube shocks are matched to this lift, and the stainless brake lines are included. Confirm brake line routing once the arms are in, then set the alignment.
What’s included
Twin tube shocks, chromoly long arms with PT-Meg bushings, Super-Flex spherical ball joints, tuned lift springs, a rear track bar, stainless front and rear brake lines and a belly pan.
