Overview
The Rubicon Express RE7128T is a 4.5-inch Super-Flex suspension lift kit with twin tube shocks included. It fits the 2007-2018 Jeep Wrangler (JK). It is the twin tube version of the RE7128 and includes adjustable lower control arms, an adjustable front track bar, replacement springs, extended bump stops, brake lines and sway bar disconnects. Its lift height sits in the 3 to 4.99-inch range.
Super-Flex front control arms replace the lower arms while the stock upper control arms remain on the vehicle. The design is intended to add trail flexibility and keep the ride comfortable on pavement. The fitment range is 3 to 4.99 inches. The twin tube shocks come with the kit, so no separate shock purchase is needed.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Twin tube shocks included
- Adjustable lower control arms
- Adjustable front track bar
- Replacement springs
- Extended bump stops and brake lines
- Sway bar disconnects
Understanding twin tube shocks
Twin tube shocks use an inner working tube and an outer reservoir tube. The design is widely used because it is simple to service, and the body can usually be rebuilt rather than replaced. Shock performance depends on valving, fluid condition and the load each corner carries, so a matched set matters on a lifted vehicle.
Twin tube and monotube shocks differ mainly in how heat and oil are handled during long descents or repeated hard hits. Choose the design that fits how the vehicle is driven, and keep the mounting hardware in good shape. Replace worn eyelet bushings and check the bolt condition when the kit is installed.
- Look for oil residue along the shock body
- Check mounts and bushings for play
- Replace shocks in pairs for even damping
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7128T |
| UPC | 700007255051 |
| System type | Super-Flex suspension lift |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Lower control arms | Adjustable |
| Front track bar | Adjustable |
| Shocks | Twin tube, included |
Vehicle fitment
The kit fits the 2007-2018 Jeep Wrangler (JK) across the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.
The kit is built for the JK Wrangler, so match the model and trim to your vehicle before buying.
Installation notes
The adjustable lower control arms and front track bar change suspension geometry, so the alignment should be checked after the install.
What’s included
The kit includes adjustable lower control arms, an adjustable front track bar, replacement springs, extended bump stops, brake lines, sway bar disconnects and twin tube shocks.






