Overview
The Rubicon Express JK4423FP is a 3.5 inch extreme duty 4-link long arm lift kit for the Jeep Wrangler JK. The kit uses adjustable chromoly upper and lower control arms, with Super-Flex spherical ball joints and PT-MEG Super-Ride bushings.
The series it belongs to was made for buyers who want FOX shocks, and the kit covers the most popular Jeep JK suspension systems. Fox Performance shocks are included with it, in the Fox Performance Series or the Performance Series with Reservoir.
Shocks in the Fox Performance Series are covered by the FOX warranty and are not eligible for the Rubicon Express Advantage Warranty.
Key features
- 4-link long arm system
- Adjustable chromoly control arms
- Super-Flex spherical ball joints
- PT-MEG Super-Ride bushings
- Full width transmission crossmember
- Fox Performance shocks included
Choosing the right setup
A 4-link long arm kit controls axle location, which is why it is often chosen for trucks that see steep grades and rough ground. The arms share the load of acceleration and braking, so the axle stays in a consistent position as the suspension cycles. Shoppers usually think about the shock setup, the steering geometry and how the kit will be used before selecting a system.
Care after the install is straightforward. Check the ball joints and bushings for play after the first few trips, and inspect the boots for cuts. Because the axle position changes, the driveline should be checked and the alignment set again once the vehicle has settled. Keep the shock mounts and bump stops in good condition, since they take extra work when the suspension has more travel.
- Check joint boots for cuts after rough trail use
- Recheck the alignment after the first few weeks
- Inspect shock mounts and bump stops at each service
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4423FP |
| Lift height | 3.5 inch |
| Lift height range | 2.5 to 3.5 inches |
| Suspension type | Extreme duty 4-link long arm |
| Control arm material | Chromoly, adjustable |
| Ball joints | Super-Flex spherical |
| Bushings | PT-MEG Super-Ride |
| Crossmember | Full width transmission |
| Shocks | Fox Performance, included |
Vehicle fitment
The kit fits the 2007–2018 Jeep Wrangler (JK), which covers the most popular Jeep JK suspension systems.
The JL, the Gladiator, and the TJ and LJ are not part of this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the axle location with a long arm kit alters driveline angles, so have them checked once the kit is in. Trucks from 2012 onward may require an exhaust modification or a front drive shaft.
What’s included
Adjustable chromoly upper and lower control arms, 4-link long arm components, Super-Flex spherical ball joints, PT-MEG Super-Ride bushings, a full width transmission crossmember and Fox Performance shocks.






