Overview
The Rubicon Express 5.5 Inch Extreme-Duty Long Arm Lift Kit with Rear Track Bar, No Shocks (part number RE7205), is a long arm suspension lift for the Jeep TJ. The stated lift height range is 5 to 6.99 inches, and shock absorbers are not included.
The Extreme-Duty long arm design replaces the stock TJ suspension as a complete system, and longer control arms form the core of it.
No shocks come with this kit, so shock length must be matched to the 5 to 6.99 inch lift range. Stainless brake lines are included to cover the longer line run that a lift of this size creates. The three-piece belly pan is part of the design, and it protects the transfer case and transmission area while still giving access for service.
Key features
- Chromoly long arms
- PT-Meg Super-Ride bushings for on- and off-road performance
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Tuned lift springs
- Front and rear stainless brake lines included
- Rear track bar included
- Three-piece belly pan for transfer case and transmission access
Long arm lifts and the TJ
Long arm kits change the geometry of the front and rear axles by moving the pivot points, so the suspension travels in a different arc than the stock setup. On a TJ, that means steering, driveline and brake hose lengths need a fresh check once the new arms are in.
Shock selection is the step many owners rush. Shocks sized for a stock TJ can run out of travel or bind at full droop, so choose units that cover the lift range and the mounting points used by long arms. Inspect the bushings and spherical joints regularly, since heavy use on rough trails loads them quickly.
Expect the belly pan and track bar to be part of the install work. Check the track bar mounting and the stainless brake lines for clearance after the first drive, and recheck the control arm fasteners after the first few trail runs.
- Shock length for the lift range
- Steering linkage and tie rod clearance
- Brake hose reach at full travel
- Spherical joint and bushing inspection
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7205 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Extreme-Duty long arm |
| Rear lift method | Coil springs |
| Shock absorbers | Not included |
| Brake lines | Front and rear stainless |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ) without a trim restriction.
The LJ and the JK and JL Wranglers are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5 to 6.99 inch lift is a large change for a TJ, so check the driveline angles, the steering linkage and the brake hose lengths after installation. Shocks should be sized for this lift before the install.
What’s included
A rear track bar, tuned lift springs, chromoly long arms with PT-Meg bushings and Super-Flex spherical ball joints, front and rear stainless brake lines and a three-piece belly pan.
Not included: shock absorbers.


