Overview
The Rubicon Express RE7124M is a 4.5 inch Super-Flex short arm lift kit with mono tube shocks. It is designed for enthusiasts who want a short arm suspension that keeps the factory mounting locations. The listed lift height range is 3 to 4.99 inches.
The Super-Flex system uses new adjustable upper control arms and fixed lower control arms, each with a serviceable Super-Flex spherical ball joint. It includes replacement lift springs and extended bump stops.
Longer front and rear stainless steel brake lines are included to match the new geometry. Mono tube shocks are part of the kit.
Key features
- Short arm design that retains the factory mounting locations
- Adjustable upper control arms
- Fixed lower control arms
- Serviceable Super-Flex spherical ball joints
- New PT-Meg Super-Ride bushings
- Replacement lift springs and extended bump stops
- Longer front and rear stainless steel brake lines
- Mono tube shocks included
Before you buy
A short arm kit replaces the upper and lower control arms while keeping the factory mounting locations. That approach lets the suspension gain height without moving the arm pivots far from their original points, which is why alignment and joint condition matter so much. The arms carry the wheel travel, so their joints and bushings see the most load.
Ball joints are the parts most often checked after a control arm change. A serviceable joint can be inspected and replaced without swapping the whole arm, but it should be tested for play when the wheel is lifted. Lift springs and bump stops are installed as a set with the arms, so keep them together when servicing the suspension.
Brake lines are often replaced when the suspension changes height, since stock lines may be too short for the new geometry. Check routing for rub points and make sure the lines have slack through full compression and droop. Steering stabilizers and drag links are commonly inspected at the same time.
- Inspect ball joint boots for tears and grease loss
- Check bushings in the new arms for play
- Recheck all fasteners after the first trail runs
- Verify brake line clearance at full droop
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7124M |
| UPC | 614901452761 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Short arm |
| Kit type | Super-Flex short arm |
| Rear lift method | Coil springs |
| Shocks included | Yes, mono tube |
| Fitment | Direct fit |
Vehicle fitment
Confirm fit for your vehicle before ordering.
Match the year, model and trim of your vehicle to the kit before placing an order.
Installation notes
The control arms change the suspension geometry, so a full alignment is needed after installation. The stainless steel brake lines are longer than stock, so check the routing when the kit is installed.
What’s included
The kit includes adjustable upper control arms, fixed lower control arms with Super-Flex spherical ball joints, PT-Meg Super-Ride bushings, replacement lift springs, extended bump stops, longer front and rear stainless steel brake lines and mono tube shocks.






