Overview
The RE7000-3 is a 3.5-inch Super-Flex short arm lift kit with no shocks, built for TJ and LJ Wranglers that still run factory short arm geometry. It is a complete package with eight new control arms, adjustable upper front and rear arms, serviceable Super-Flex spherical ball joints and an adjustable front track bar. It uses the same design as the RE7000-3T, without the twin tube shocks.
The kit covers TJ Wranglers from 1997-2006 and LJ models from 2004-2006. The Super-Flex system combines flexibility and handling, and the kit adds extended bump stops, longer front stainless steel brake lines and Gen II sway bar disconnects. The lift is 3.5 inches, within the 3 to 4.99-inch range for this system.
Key features
- 3.5-inch lift height, in the 3 to 4.99-inch range on the chart
- Eight new control arms
- Adjustable upper front and rear control arms
- Fixed lower control arms
- Serviceable Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Adjustable front track bar
- Extended bump stops, longer front stainless steel brake lines and Gen II sway bar disconnects
Installing a short arm kit
A short arm lift replaces the control arms while keeping the factory mounting points, so the work centers on swapping the arm set, track bar and springs. Plan on extra time with a helper, and keep the old parts until the new set is confirmed to fit. Get a wheel alignment afterward, since the track bar and arms set the axle position.
Shock choice is a separate decision with this kit. Because shocks are not included, existing shocks should be checked for length and wear before the lift goes in. Shocks that bind or leak will limit the new suspension travel, so they should be replaced when worn.
Sway bar disconnects change how the body rolls and how the axles work across uneven ground. Consider how the vehicle will be used on road and trail before setting them up. Bump stops and brake lines should be checked after the first few drives to confirm they clear the moved parts.
- Check existing shock length before installing
- Keep old hardware until the new parts are confirmed
- Get a wheel alignment after the lift
- Recheck brake line clearance after the first drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7000-3 |
| UPC | 614901441604 |
| System type | Super-Flex short arm lift |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Control arms | Eight new; adjustable upper front and rear, fixed lower |
| Joints | Serviceable Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Not included |
Vehicle fitment
It is for TJ and LJ Wranglers, and it is designed for vehicles that still run factory short arm geometry.
Verify your year, model and trim before ordering, since this kit is not for long arm vehicles.
Installation notes
The kit replaces the control arms, track bar and lift springs, so the alignment should be checked after installation. The longer front brake lines are part of the same job.
What’s included
The kit includes eight new control arms, an adjustable front track bar, replacement lift springs, extended bump stops, longer front stainless steel brake lines and Gen II sway bar disconnects.
Not included: shock absorbers. The RE7000-3T adds twin tube shocks to the same design.



