Overview
The Rubicon Express RE7124 is a 4.5-inch Super-Flex short arm lift kit with no shocks. It is a direct fit for the 2007-2018 Jeep Wrangler JK. The system retains the factory mounting locations, and its adjustable upper control arms and fixed lower control arms use serviceable Super-Flex spherical ball joints.
The Super-Flex system is built for ride quality and performance on and off road. The kit includes replacement lift springs, extended bump stops and longer front and rear stainless steel brake lines. Shocks are not included, so keep the existing shocks or purchase a separate set. The lift falls in the 3 to 4.99-inch range.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Short arm design that retains the factory mounting locations
- Adjustable upper control arms
- Fixed lower control arms
- Serviceable Super-Flex spherical ball joints
- New PT-Meg Super-Ride bushings
- Tuned lift springs
- Extended bump stops and longer front and rear stainless steel brake lines
Choosing a lift height
A short arm lift raises the body by changing the control arms and springs at each front corner. Because the arms are shorter than long arm designs, the axle stays closer to its factory position, which keeps daily driving close to stock. Shoppers comparing lift styles should weigh how much articulation they want on the trail against the ride they expect on pavement, since stiffer springs and shorter arms respond differently over rough ground.
Several parts are often replaced together with a lift like this. Shock absorbers should be checked for length and damping, because the kit leaves them out and a new ride height changes how they work. Track bars, steering components and brake hoses may need inspection once the body is raised. Ball joints and bushings wear over time, so check them at each service and replace any that show play.
- Check shock length against the new ride height
- Inspect brake hoses for length after the install
- Re-torque fasteners after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7124 |
| UPC | 614901441697 |
| System type | Super-Flex short arm lift |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Upper control arms | Adjustable |
| Lower control arms | Fixed |
| Joints | Serviceable Super-Flex spherical ball joints |
| Brake lines | Stainless steel, front and rear, longer than stock |
| Shocks | Not included |
Vehicle fitment
It is a direct fit for the 2007-2018 Jeep Wrangler JK, covering the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the upper and lower control arms and the lift springs changes the suspension geometry, so the alignment should be checked after the install.
What’s included
The kit includes adjustable upper and fixed lower control arms, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings, tuned lift springs, extended bump stops and longer front and rear stainless steel brake lines.
Not included: shock absorbers.






