Overview
The Rubicon Express JKRR24M is a 4.5-inch extreme-duty radius long arm kit with shocks included. It fits the 2007-2018 Jeep Wrangler (JK). It is the shock-equipped version of the JKRR24 and includes radius long arms, control arms, a transmission crossmember, lift springs, brake lines, a track bar and a drag link.
The Extreme-Duty Long Arm System is a radius long arm suspension for the Jeep Wrangler JK. It works with the Jeep’s electronic stability controls and the Rubicon edition electronic sway bar, and its geometry keeps pinion and driveshaft angles in phase. The kit covers lifts from 3 to 4.99 inches.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Front and rear radius arms
- Radius long arms and control arms
- Transmission crossmember included
- Lift springs and brake lines included
- Track bar and drag link included
- Shocks included
Shock and sway bar care
Radius arm kits change pinion and driveline angles, so the front and rear shock mounts see different motion than stock. Shocks included with a kit should be checked for leaks and bushing wear after the first few drives, and mounting hardware should be re-torqued.
Electronic stability systems rely on steady wheel speed and sensor input, so tire size and wheel changes should be matched carefully after a lift. A disconnected or altered sway bar can change how the vehicle leans in turns. Keep sensors clean and check their wiring after installation.
On the trail, the radius arms keep the axles in position while the springs carry the weight. Inspect the arm bushings and joints after hard runs, since worn bushings let the axle wander and add stress elsewhere.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JKRR24M |
| UPC | 70000651270 |
| System type | Extreme-duty radius long arm kit |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Front arm type | Radius arm or radius arm brackets |
| Rear lift method | Radius arm |
| Included hardware | Radius long arms, control arms, transmission crossmember, lift springs, brake lines, track bar, drag link |
| Shocks | Included |
Vehicle fitment
This kit suits 2007-2018 Jeep Wrangler (JK) models in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms change the pinion, driveline and steering geometry, so the alignment and driveline angles should be checked once the kit is in.
What’s included
The kit includes the radius long arms, control arms, transmission crossmember, lift springs, brake lines, track bar, drag link and shocks.
Because the shocks are part of this version, the buyer does not need to choose a separate shock set for the radius kit. The radius arms, lift springs and brake lines are the parts the install centers on, so the work should be planned around them.
