Overview
The Rubicon Express JK4444 is a 4.5-inch extreme-duty 4-link long arm lift kit, offered without shocks. It sits in Rubicon Express’s JK suspension line. The adjustable chromoly upper and lower control arms use Super-Flex spherical ball joints, and PT-Meg Super-Ride bushings complete the arm set. The full-width transmission crossmember provides the drivetrain mounting structure.
The no-shock version of the 4.5-inch 4-link long arm is designed to deliver control and performance without limiting articulation. Installation does not require welding. Optional monotube shocks, a belly pan and CNC-machined steering knuckle upgrades are available for this system. The kit falls within the 3 to 4.99-inch lift range.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Extreme-duty 4-link long arm system
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Designed for installation without welding
- Optional belly pan and steering knuckle upgrades
Long arm setup considerations
Long arm kits move the axle attachment points and change how the suspension travels through its range. Control arm angles affect axle tracking and how the springs load, so the arms are best treated as part of a complete geometry plan rather than a single swap. Before installing, inspect the factory bushings and joints on any parts that remain, since worn components can affect how the new arms settle.
Driveline angles deserve early attention. Raising the axle changes pinion angle, and vibration at highway speed is often the first sign that angles are off. A shop with a driveline angle gauge can measure before and after the install. Set alignment once the vehicle is at its final ride height, and use the adjustment range of the arms to dial in caster and pinion settings.
- Torque all fasteners again after the first few drives
- Inspect ball joint boots at regular service intervals
- Plan shock selection before the install begins
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4444 |
| UPC | 70000651257 |
| System type | Extreme-duty 4-link long arm lift |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Not included |
Vehicle fitment
It belongs to the JK suspension range. Verify the year, model and trim against your vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 4-link arms change control arm angles and pinion geometry, so the alignment and driveline angles should be checked after the install.
What’s included
The named parts are the adjustable chromoly control arms, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings and the full-width transmission crossmember.
Not included: shock absorbers.
The adjustable chromoly control arms and Super-Flex spherical ball joints give the kit its arm geometry, and the PT-Meg Super-Ride bushings are part of the same set. The full-width transmission crossmember is the piece the manufacturer points to for drivetrain support during the install.



