Overview
The Rubicon Express 3.5 Inch Extreme-Duty Long Arm Lift Kit with Rear Track Bar, No Shocks (part number RE7203), is a long arm suspension lift for the Jeep TJ. The stated lift height range is 3 to 4.99 inches. Shock absorbers are not included, so the buyer chooses the shocks.
This complete suspension replacement uses longer control arms to improve geometry on a lifted TJ. The design adds stability on and off road, reduces torque roll and improves trail traction over a standard short arm lift.
Because the kit excludes shocks, the buyer chooses a twin or mono tube shock sized for the 3 to 4.99 inch range. Front and rear stainless brake lines are included, so the brake lines are replaced as part of the work rather than reused.
Key features
- Chromoly long control arms
- PT-Meg Super-Ride bushings designed for on- and off-road performance
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Tuned lift springs
- Rear track bar included
- Front and rear stainless brake lines
- Three-piece belly pan for easy transfer case and transmission access
Choosing shocks for this kit
Shocks are the part a buyer has to pick on a no-shock long arm kit, so choose them before the old arms come off. Twin tube and mono tube designs differ in how they handle heat and damping, and either can work on a TJ if the length and mounting points suit the lift. Match the shock to your driving, with more weight on highway use or heavier trail work.
Check the old shock mounts and bushings before reusing anything. Worn eyes can make a new shock feel loose and wear quickly. Test-fit the shock with the arm in place before the hardware is fully tightened, so you find any clearance problem early.
- Measure shock length at full extension and compression
- Inspect shock eyes and bushings for cracks
- Use new hardware where the old is corroded
- Bench-fit each shock before the arms are installed
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7203 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Extreme-Duty long arm |
| Rear lift method | Coil springs |
| Shock absorbers | Not included |
| Track bar | Rear, included |
| Brake lines | Front and rear stainless |
| Fitment type | Direct fit |
Vehicle fitment
It fits the Jeep TJ, which covers the 1997–2006 Wrangler (TJ) with no trim limit. LJ, JK and JL Wranglers are outside this kit’s fit. Confirm fit for your vehicle’s year, model and trim before ordering.
The LJ and the JK and JL Wranglers are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because no shocks come with this kit, the existing shocks have to be checked for length and mounting point before the new arms go on. Set the alignment and check the driveline angles afterward.
What’s included
Chromoly long arms, PT-Meg bushings, Super-Flex spherical ball joints, tuned lift springs, a rear track bar, front and rear stainless brake lines and a three-piece belly pan.
Not included: shock absorbers.


