Overview
The Rubicon Express RE7140P is a 2.5 inch super-flex suspension lift for the 2007–2018 Jeep Wrangler (JK) Unlimited four-door. It is a short arm system that keeps the factory mounting points and lowers the center of gravity.
The kit uses adjustable upper and lower control arms with PT-Meg bushings and serviceable super-flex joints, an adjustable front track bar, and tuned coil springs. The progressive coils have a longer extended length than linear coils, which maximizes droop travel. The adjustable control arms allow the alignment to be set after installation.
Key features
- 2.5 inch lift with coil springs
- Adjustable upper and lower control arms
- PT-Meg bushings and serviceable super-flex joints
- Adjustable front track bar
- Progressive coil springs for a smooth ride over small bumps, with enough rate to prevent harsh bottoming during full compression
- Twin tube shocks at the rear
- Keeps the factory mounting systems.
- Designed to keep a low center of gravity
Adjustable arms and alignment
Adjustable control arms let caster and camber be set after the lift is in place, which matters because arm positions change how the wheels sit. Super-flex joints allow more articulation than a standard joint, but they also wear over time, so inspect the joint boots and bushings for cracks, looseness or grease leaks. Serviceable joints can be replaced without replacing the whole arm, which keeps long term upkeep simpler.
Short arm systems keep the factory mounting points, so the work is mainly adjusting and aligning rather than rebuilding the suspension. Progressive coils ride differently from linear coils over small bumps, and the change can be noticeable on a daily drive. Recheck torque on all arm fasteners after the first few trail runs and after any heavy impact, since loose hardware is a frequent source of noise and wander.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7140P |
| Suspension type | Lift kit, super-flex short arm |
| Lift amount | 2.5 inch suspension lift |
| Lift height range | 0 to 3.5 inches |
| Rear lift method | Coil springs |
| Rear shocks | Twin tube |
| Front shocks | None listed |
| Control arms | Adjustable upper and lower, with PT-Meg bushings |
| Track bar | Adjustable front track bar |
| Shocks included | Yes |
| Tire size | 35-inch |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) Unlimited four-door in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
The list does not include two-door JK models or the 2018 and later JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The super-flex joints and control arm adjustments change the suspension alignment, so have the alignment and driveline angles checked after installation. Set the alignment after the control arms are adjusted, because caster and camber depend on the arm positions.
What’s included
The kit includes upper and lower control arms, an adjustable front track bar, coil springs and twin tube shocks at the rear.






