Overview
The Rubicon Express RE7142M is a 3.5 inch standard coil lift kit with monotube shocks for the Jeep Wrangler JK. It includes the front and rear coil springs and monotube shocks, and it keeps the existing control arms in place.
The system is a low-cost suspension package built for both on and off-road use. It is designed for 33 or 35 inch tires and can be upgraded later to a 3.5 to 4.5 inch Super-Flex or Extreme-Duty long arm system by adding components.
The kit fits 2007–2018 Wrangler JK models. On 2012 and newer models, an exhaust modification or a front driveshaft may be needed.
Key features
- Front and rear replacement coil springs
- Monotube shocks included
- Front and rear cam bolts for caster and pinion adjustment
- Front and rear bump stops
- Adjustable front track bar and rear track bar bracket
- Extended sway bar end links
- Designed to upgrade later to a 3.5 to 4.5 inch long arm system
Monotube shocks and clearance
Monotube shocks separate the gas from the oil in a single cylinder, which helps them keep damping consistent during long off-road runs. Shock length and mounting points matter more after a 3.5 inch coil lift, because the suspension travels through a different range. Check clearance at full compression, especially with 35 inch tires, since a shock that bottoms against a mount can wear quickly.
Driveline clearance is the other concern on newer Wrangler JK models. Exhaust and front driveshaft routing should be inspected before the lift goes on, and any rubbing marks should be dealt with early. Long arm upgrades later change the geometry further, so a fresh alignment check is part of that job.
- Check shock mounts for cracks at each service
- Inspect exhaust hangers after installation
- Check the front driveshaft for vibration after the first drive
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7142M |
| UPC | 614901452778 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Coil spring kit |
| Kit type | Standard kit |
| Rear lift method | Coil springs |
| Shocks included | Yes, monotube |
| Tire size | 33 or 35 inch |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler JK models.
For the TJ, LJ, JL or other generations, confirm fit against your vehicle’s year, model and trim before ordering.
Installation notes
On 2012 and newer models, check clearance for an exhaust modification or a front driveshaft before installing. Plan an alignment after installation, since the cam bolts and track bar set caster and pinion angle.
What’s included
The kit includes front and rear replacement coil springs, monotube shocks, front and rear cam bolts, front and rear bump stops, an adjustable front track bar, a rear track bar bracket and extended sway bar end links.






