Overview
The Rubicon Express RE7127PT is a 3.5 inch Super-Flex lift kit for the Jeep Wrangler JK. It is built as a progressive coil lift kit, and Rubicon Express points it at the JK owner who is shopping for a lower price point.
Super-Flex front control arms replace the lower control arms, and the stock upper control arms stay in place. The kit is intended to improve trail flexibility on a JK while keeping a comfortable street ride.
Twin tube shocks come with the kit, and the listed lift height range is 3 to 4.99 inches.
Key features
- Super-Flex front control arms
- Stock upper control arms retained
- Progressive coil springs
- Twin tube shocks included
- Adjustable lower control arms and adjustable front track bar
- Extended bump stops and sway bar disconnects
Setting up after install
After a suspension change, the first things to revisit are the alignment and the way the axle sits under the body. Control arm length and track bar setup both feed into caster and toe, so a shop reading on the front end will catch small errors before they wear tires. Retorque fasteners once the vehicle has settled, since new arms and springs can seat slightly during the first drive cycles.
Sway bar disconnects are a practical choice on trails, letting the axle articulate more freely, but they reduce body roll on pavement. Many owners set them for how they use the vehicle and reconnect them for highway runs. Twin tube shocks are a reasonable match for a lower-cost coil setup, and they respond well to regular inspection of mounts and bushings for play.
- Check toe after the first alignment
- Inspect track bar ends for play
- Recheck bump stop clearance after rough trails
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7127PT |
| Lift height | 3.5 inch, listed range 3 to 4.99 inches |
| Front suspension | Super-Flex short arm |
| Rear suspension | Progressive coil springs |
| Shocks | Rubicon Express Twin Tube, included |
| Track bar | Adjustable front |
| Other parts | Extended bump stops, sway bar disconnects |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK). Verify the year, model and trim for your vehicle before buying.
The JL, the Gladiator, and the TJ and LJ Wrangler are outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A lift kit changes suspension geometry, so have the alignment checked after installation and review the driveline angles. Check how the sway bar disconnects are set before first use.
What’s included
Super-Flex front control arms, progressive coil springs, twin tube shocks, an adjustable front track bar, extended bump stops and sway bar disconnects.







