Overview
The Rubicon Express JK4343P is a 3.5-inch extreme-duty long arm lift kit with a 4-link front, a 3-link rear and progressive coil springs. It fits the 2007-2018 Jeep Wrangler (JK) and is part of Rubicon Express’s JK suspension line. Adjustable chromoly upper and lower control arms carry Super-Flex spherical ball joints and PT-Meg Super-Ride bushings.
Progressive coils offer longer droop travel than linear coils. The progressive spring rate gives a smooth ride over small bumps and enough rate to limit harsh bottoming at full compression. The full-width transmission crossmember is the frame-side component of the system, and installation does not require welding.
Key features
- 3.5-inch lift height
- Progressive coil springs for longer droop travel
- Extreme-duty 4-link front and 3-link rear long arm system
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Optional monotube shocks and belly pan upgrades in other kits of the series
Progressive coils and droop travel
Coil springs carry the vehicle’s weight, and a progressive design changes its rate as it compresses. The softer start helps the ride stay smooth over small bumps, while the stiffer end resists bottoming on bigger hits. Coil spring rate is closely tied to the rest of the setup, so a matched set of springs, shocks and bump stops is the usual approach for a long arm build.
Droop travel is the other side of the story. Extended spring length matters when a tire lifts off the ground, because the suspension needs room to reach the ground again. When inspecting springs, look for rust on the coils, cracked spring pads and sagging after the first season. Pair any new springs with checks on the bump stops and shock mounts so the full range of motion stays usable.
- Inspect spring pads for cracks
- Look for coil rust and sag over time
- Check bump stop wear alongside the springs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4343P |
| UPC | 700008140201 |
| System type | Extreme-duty 4-link front and 3-link rear long arm with progressive coils |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Spring type | Progressive coil |
| Control arms | Chromoly upper and lower, adjustable |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Transmission crossmember | Full width |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK), including the 2-door and Unlimited 4-door versions of that generation.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The control arm and crossmember changes alter the arm angles and pinion geometry, so the alignment and driveline angles should be checked after installation.
What’s included
The kit includes the adjustable chromoly control arms, the progressive coil springs, Super-Flex spherical ball joints, PT-Meg Super-Ride bushings and the full-width transmission crossmember.
Not included: the optional belly pan and steering knuckle, which are separate upgrades.
The progressive coil springs are the main spring feature of this kit, and they are paired with the same chromoly control arms and Super-Flex joints used across the family. The full-width transmission crossmember is included, and optional belly pan and steering knuckle upgrades are available from the brand for this system.
