Overview
The Rubicon Express RE7122M is a 3.5-inch standard coil lift kit for the Jeep Wrangler JK, with Mono Tube shocks included. It fits the 2007-2018 Jeep Wrangler (JK). It is the Mono Tube version of the RE7122 and uses the same coil springs, cam bolts and track bar parts. It is a budget-minded package for a smooth ride on the road and the trail.
The kit includes front and rear replacement coil springs, front and rear cam bolts for caster and pinion adjustment, front and rear bump stops, a front adjustable track bar, a rear track bar bracket and extended sway bar end links. The factory control arms are kept, and the suspension allows 33-inch or 35-inch tires. It covers a 3 to 4.99-inch lift range.
Key features
- 3.5-inch lift height, within the 3 to 4.99-inch range
- Front and rear replacement coil springs
- Front and rear cam bolts for caster and pinion adjustment
- Front and rear bump stops
- Front adjustable track bar
- Rear track bar bracket
- Extended sway bar end links
- Mono Tube shocks included
Shock setup for a coil lift
Mono Tube shocks are a single-tube design that owners often choose for steady damping. With a 3.5-inch coil lift the shocks work at a new ride height, so their mounting points and travel should be checked during installation. Shocks that already show leaks or worn bushings are better replaced at the same time as the springs.
A coil lift on a JK changes wheel geometry more than many owners expect. Cam bolts are used during alignment to set caster and pinion, and track bar parts keep the axle centered. Listening for clicks or knocks over the first few drives helps catch loose joints early.
- Check shock mounts for wear
- Inspect bump stops before the first drive
- Recheck cam bolts after the first alignment
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7122M |
| UPC | 614901452747 |
| Kit type | Standard coil lift |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Rear lift method | Coil springs |
| Shocks | Mono Tube, included |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cam bolts set caster and pinion angle, so both should be checked once the lift is in place. The alignment is the main check after the install.
What’s included
The kit includes front and rear replacement coil springs, front and rear cam bolts, front and rear bump stops, a front adjustable track bar, a rear track bar bracket, extended sway bar end links and Mono Tube shocks.










