Overview
The Rubicon Express RE7003T is a 3.5 inch Super-Flex short arm lift kit with TwinTube shocks for Jeep Wrangler TJ and LJ models. It is built for owners who want less lift than the 4.5 inch system, with a ride that improves on the factory setup while adding flexibility and articulation.
As a short arm system, the kit lifts the vehicle with coil springs at the rear and uses fixed lower control arms at the front and rear. The 3.5 inch kit can later be upgraded to the 4.5 inch system.
Key features
- Short arm suspension system with 3.5 inches of lift
- New PT-Meg Super-Ride bushings, designed by the manufacturer for on-road and off-road performance
- Tuned lift springs included
- Stainless steel front brake lines included
- Front and rear lower fixed control arms
- TwinTube shocks included
- Rear lift method: coil springs
- Can be upgraded to the 4.5 inch system later
Living with a short arm lift
A short arm lift changes how the front and rear of a Wrangler move on the trail. With fixed lower control arms, the axle stays located by the arm geometry, so steering and braking feel depend on how well the front end is aligned after the lift.
Many owners replace related parts at the same time. Worn track bar ends, tie rod ends and sway bar links are often inspected when the suspension changes height, since their angles shift with the new ride height. Bushings wear over time, and a squeak or clunk over bumps is a common sign that a joint needs attention. Inspect the boots on any ball joint and look for play by hand during regular service.
- Check tie rod ends and track bar ends for play
- Inspect bushings for cracks or splitting
- Look for leaking shock bodies after rough trails
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7003T |
| UPC | 614901453164 |
| Product type | Suspension lift kit |
| Lift height | 3.5 inches |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Super-Flex short arm |
| Shocks | TwinTube shocks included |
| Rear lift method | Coil springs |
| Bushings | PT-Meg Super-Ride |
| Control arms | Front and rear lower fixed control arms |
| Brake lines | Stainless steel, front |
| Fit type | Direct fit |
Vehicle fitment
The kit is for Jeep Wrangler TJ and LJ models. The TJ is the 1997-2006 Jeep Wrangler and the LJ is the 2004-2006 Wrangler Unlimited.
This kit is for the Wrangler TJ and LJ only. Other Wrangler generations such as the YJ, JK and JL are not covered. Check your year, model and trim against the kit before ordering.
Installation notes
Suspension components affect steering, braking and handling, so professional installation is recommended. Torque every fastener to the specified values for the kit.
Re-check all hardware after the first miles of driving, and have the alignment checked after any suspension work. Changes in ride height can affect brake lines, driveline angles and headlight aim, and local regulations on vehicle lift may apply.
What’s included
- Super-Flex short arm lift system
- TwinTube shocks
- Tuned lift springs
- Stainless steel front brake lines
- Front and rear lower fixed control arms
Not included: Items such as an alignment or driveline modifications are not part of the kit.













