Overview
The Rubicon Express JT7147 is a 4.5/5.5 inch Super-Flex suspension lift kit for the 2020-2026 Jeep Gladiator (JT). The kit is a Super-Flex short arm system with rear coil springs, and it does not include shocks.
Lifting a Gladiator JT improves ground clearance and allows larger tires, but it can affect suspension and steering geometry. This Super-Flex kit corrects steering and control arm geometry, which is designed to reduce bump steer and increase anti-dive for better braking.
Key features
- 4.5 to 5.5 inch suspension lift kit
- Super-Flex short arm suspension type
- Rear lift method: coil springs
- Listed tire size of 37 inches
- Corrects steering and control arm geometry
- Designed to eliminate bump steer and increase anti-dive, per the manufacturer
- Shocks not included
Choosing shocks for a lift
Because this kit does not include shocks, the shock choice becomes part of the setup. Shocks control how springs compress and rebound, and a lifted truck with a longer suspension arc places different demands on them. Look for shocks designed for the lifted height and for the type of driving planned, whether that is daily road use, trail work or towing.
Steering and braking parts are closely tied to the geometry this kit changes. After installation, check the tie rods, drag link and brake hoses for stretch or contact at full articulation. Bushings and ball joints should be inspected at the same time, since a lift can increase wear on parts that were not built for the new angles.
- Check brake hose length after the lift is in
- Look for tire rubbing at full steering lock
- Recheck torque on control arm fasteners after the first drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JT7147 |
| Catalog part number | R/EJT7147 |
| Product type | Suspension lift kit |
| Lift kit | 4.5-5.5 in. |
| Lift height range | 4-5.5 inches |
| Tire size | 37 inches |
| Suspension type | Super-Flex short arm |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Shocks included | No |
| Fit type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Rubicon Express JT7147 covers the 2020-2026 Jeep Gladiator in Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
This kit is for the Gladiator (JT). Jeep Wrangler models and Gladiator years outside 2020-2026 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Professional installation is strongly recommended because suspension components affect steering, braking and handling. Torque every fastener to specification, re-check all hardware after the first miles of driving, and have the alignment checked after any suspension work.
Re-check all hardware after the first miles of driving, and have the alignment checked after any suspension work. Changes in ride height can affect brake lines, driveline angles and headlight aim, and local regulations on vehicle lift may apply.
Lifted vehicles may need longer brake lines, adjusted driveline angles and headlight re-aiming, so check these after installation.
What’s included
The kit is a Super-Flex short arm lift kit with rear coil springs.
Not included: Shocks are not included, so front and rear shocks suited to the lifted height must be bought separately. Alignment and new tires are also not included.
























