Overview
The Rubicon Express JK4R43FP is a 3.5 inch extreme duty lift kit for the Jeep Wrangler JK, built with a 4-link front and radius rear long arm layout. It is offered with front and rear Fox Performance shocks.
Its control arms are chromoly and adjustable, and the kit uses Super-Flex spherical ball joints with PT-MEG Super-Ride bushings. A full width transmission crossmember is included, which Rubicon Express says allows installation without welding.
The kit belongs to a line of kit numbers that cover the most popular Jeep JK suspension systems. The Fox Performance Series shocks are covered by the FOX warranty and do not qualify for the Rubicon Express Advantage Warranty.
Key features
- 4-link front and radius rear long arm system
- Chromoly upper and lower control arms
- Adjustable control arms
- Super-Flex spherical ball joints
- PT-MEG Super-Ride bushings
- Front and rear Fox Performance shocks
- Full width transmission crossmember
- No welding
Things to check
A mixed front and rear layout, such as a 4-link front with radius arms in the rear, changes how the axle moves on both ends of the vehicle. Before the install, it helps to look over the steering components, the brake hoses and the driveline, since each one is affected by the new arm positions. Plan the work so the alignment and driveline checks happen right after the kit goes on.
Over time, the joints and bushings do the most work in a setup like this. Check the ball joints for play, the bushings for cracks and the arms for bends after rough trail use. Keeping the fasteners tight and the boots intact reduces wear, and a quick inspection at each service helps catch problems early.
- Check steering components before and after installation
- Inspect brake hoses for stretch after the lift
- Recheck driveline angles after any tire size change
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4R43FP |
| Lift height | 3.5 inch |
| Lift height range | 2.5 to 3.5 inches |
| Suspension type | 4-link front, radius long arm rear |
| Control arm material | Chromoly |
| Ball joints | Super-Flex spherical |
| Bushings | PT-MEG Super-Ride |
| Crossmember | Full width transmission |
| Shocks | Fox Performance, front and rear |
| Welding | None required |
Vehicle fitment
The kit fits the 2007–2018 Jeep Wrangler (JK), which covers the most popular Jeep JK suspension systems.
The JL, the Gladiator, and the TJ and LJ are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the front and rear geometry changes with this kit, have the alignment checked after installation. Trucks from 2012 onward may need an exhaust modification or a front drive shaft.
What’s included
Chromoly upper and lower control arms, 4-link front components, radius long arms for the rear, Super-Flex spherical ball joints, PT-MEG Super-Ride bushings, a full width transmission crossmember and front and rear Fox Performance shocks.






