Overview
The Rubicon Express RE7141M is a 2.5 inch standard coil lift kit for the Jeep Wrangler JK, with mono tube shocks included. It adds ground clearance and extended wheel travel, with room for 35 inch tall tires.
The kit replaces the front and rear coil springs and adds bump stops, a rear track bar bracket, extended sway bar end links and front alignment washers for caster adjustment.
Key features
- 2.5 inch lift with front and rear replacement coil springs
- Mono tube shocks included
- Extended sway bar end links
- Rear track bar bracket
- Front alignment washers for caster adjustment
- Rubicon Express Advantage Lifetime Warranty
Coil springs and ride height
Coil springs carry the vehicle’s weight, so a lift built around replacement coils changes how the suspension loads at each corner. Standard coils at this height give a moderate ride change while keeping the factory layout, which many owners prefer for daily driving. Spring rate, shock tuning and bump stop position work together, so a change to one usually affects the others.
Extended sway bar end links and a rear track bar bracket help control body movement and keep the axle located as the suspension travels. Front caster is affected by the lift, so adjusting alignment washers and checking caster afterward helps steering feel stable. Over time, look at coil springs for cracks or sagging, and check bump stops for wear.
- Check sway bar end link bushings for wear
- Inspect bump stops after off-road use
- Recheck caster after any front end work
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7141M |
| UPC | 70000625579 |
| Suspension type | Coil spring kit, standard |
| Lift height | 2.5 inch |
| Rear lift method | Coil springs |
| Shocks | Mono tube, included |
| Tire room | Room for 35 inch tall tires |
| Warranty | Rubicon Express Advantage Lifetime Warranty |
Vehicle fitment
This kit is for 2007–2018 Jeep Wrangler (JK) Unlimited models. Confirm fit for your vehicle’s year, model and trim before ordering.
Non-Unlimited JK models are not on the list, and neither are YJ, TJ or JL models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front alignment washers set caster, so align the vehicle after installing the kit. The kit does not require changing the driveshafts, exhaust or brake lines.
What’s included
Front and rear replacement coil springs, bump stops, a rear track bar bracket, extended sway bar end links, front alignment washers and mono tube shocks.






