Overview
The Rubicon Express Extreme Duty Rear Coilover Upgrade Kit, part number JK014CC, is a rear coilover upgrade for the 4-door 2007-2018 Jeep Wrangler Unlimited (JK). The kit is built to add onto Rubicon Express Extreme Duty long arm suspension systems, and it uses rear coilover shocks to increase wheel travel and optimize shock damping.
The threaded shock bodies let the owner fine tune ride height, and the dual coil springs give a progressive spring rate that Rubicon Express says is comfortable on the street and over small bumps while still controlling large obstacles. Remote reservoirs add fluid capacity for consistent damping, and the mounts are made in the USA from plate steel.
In a coilover setup, the coil spring sits around the shock body, so the spring and damper work together as one unit. A remote reservoir is a separate fluid canister linked to the shock by a hose, which adds capacity so the damping stays consistent on long trail runs. Tunable spring rates let the owner match rear stiffness to the load and the terrain.
Key features
- Rear coilover upgrade
- Increased wheel travel
- Optimized shock damping
- Dual coil springs for a progressive spring rate
- Threaded shock bodies for ride height adjustment
- Remote reservoirs
- Plate steel coilover mounts made in the USA
Choosing spring rate and ride height
Coilover rear setups let you match stiffness to the load and the terrain. Dual coil springs give a progressive feel, so the rear softens on small bumps and firms up as the suspension reaches the end of its travel. Adjusting the threaded shock bodies changes ride height, which also affects the rear geometry and how the shocks load.
After any coilover change, check the rear alignment, the spring seats and the reservoir hoses. Make sure the ride height is even from side to side, and recheck the mounting bolts after the first few drives. Replacing worn rear bushings at the same time keeps the setup predictable.
- Even ride height side to side
- Spring seat condition
- Reservoir hose clearance
- Rear alignment after adjustment
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK014CC |
| UPC | 700007523811 |
| Lift height range | Any height |
| Shocks | Included, with remote reservoirs |
| Airbumps | Not included |
| Position | Rear |
| Mount material | Plate steel, made in the USA |
Vehicle fitment
The kit is built for the 4-door 2007-2018 Jeep Wrangler Unlimited (JK) and covers the Unlimited 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.
It does not fit 2-door JK models or the TJ, LJ and JL Wranglers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear-only coilover upgrade changes rear ride height and rear suspension geometry, so the rear alignment should be checked after installation. Airbumps are not included, so the owner should decide whether they are needed for their setup.
What’s included
Rear coilover shocks with remote reservoirs, dual coil springs, threaded shock bodies and plate steel mounts. Airbumps are not included.






