Overview
The Rubicon Express JKRR24 is a 4.5-inch extreme-duty radius long arm kit with front and rear radius arms, sold without shocks. It fits the 2007-2018 Jeep Wrangler (JK). The kit includes radius long arms, control arms, a transmission crossmember, lift springs, brake lines, a track bar and a drag link.
The Extreme-Duty Long Arm System is a radius long arm suspension for the Jeep Wrangler JK. It is engineered to work with the Jeep’s electronic stability controls and the Rubicon edition electronic sway bar. Its geometry keeps pinion and driveshaft angles in phase while limiting suspension jacking and squat. The kit covers lifts from 3 to 4.99 inches.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Front and rear radius arms
- Radius long arms and control arms
- Transmission crossmember included
- Lift springs and brake lines included
- Track bar and drag link included
- Engineered to work with electronic stability controls.
Brake lines and track bar
Radius arm kits move the axle position, which means the brake lines and track bar may need to be checked after installation. Make sure the lines are free of tension and rub points when the suspension is at full travel.
The track bar and drag link control steering and axle alignment under load. After a lift, check the bar ends for play and confirm the bar clears the frame and other components. Replace worn bushings in these links at the same service to keep steering stable.
Radius arm geometry changes the pinion angle, so the driveline should be checked once the arms are in place. Shock absorbers are not included with this kit, so plan to fit a set that suits the lift.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JKRR24 |
| UPC | 70000651242 |
| System type | Extreme-duty radius long arm kit |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Front arm type | Radius arm or radius arm brackets |
| Rear lift method | Radius arm |
| Included hardware | Radius long arms, control arms, transmission crossmember, lift springs, brake lines, track bar, drag link |
| Shocks | Not included |
Vehicle fitment
Covered vehicles: 2007-2018 Jeep Wrangler (JK), with the 70th Anniversary through X trims.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms change the pinion, driveline and steering geometry, so the alignment and driveline angles should be checked once the kit is installed. The brake lines included with the kit should be checked for routing.
What’s included
The kit includes the radius long arms, control arms, transmission crossmember, lift springs, brake lines, track bar and drag link.
Not included: shock absorbers.
